Bonding BisGMA to dentin - A proof of concept for hydrophobic dentin bonding

Franklin Chi Meng Tay, David Henry Pashley, R. R. Kapur, M. R.O. Carrilho, Y. B. Hur, L. V. Garrett, K. C.Y. Tay

Research output: Contribution to journalArticle

112 Citations (Scopus)

Abstract

The use of TEGDMA as a diluent comonomer in the formulation of hydrophobic adhesives for ethanol wet-bonding is a concern, due to its leaching potential, higher water sorption, and bio-incompatibility. This study tested the hypothesis that hydrophobic bonding to acid-etched dentin may be accomplished with the use of ethanol-solvated BisGMA only. Phosphoric-acid-etched, oxalate-occluded, deep coronal dentin bonded under 20 cm water pressure with experimental BisGMA adhesives by ethanol wet-bonding exhibited tensile strengths that were not significantly different from that achieved with OptiBond FL bonded according to the manufacturer-recommended protocol, with similar acid-/base-resistant hybrid layers, resin tags, and nanoleakage distribution. Ethanol replacement of water-saturated dentin produced wider interfibrillar spaces, more extensive shrinkage of the collagen fibrils, and narrower hybrid layers. Experimental BisGMA adhesives provide the proof of concept that relatively hydrophobic resins may be coupled to acid-etched dentin by increasing its hydrophobic characteristics via ethanol replacement. They should be further optimized before clinical application.

Original languageEnglish (US)
Pages (from-to)1034-1039
Number of pages6
JournalJournal of Dental Research
Volume86
Issue number11
DOIs
StatePublished - Nov 1 2007

Fingerprint

Dentin
Ethanol
Adhesives
Acids
Water
Oxalates
Tensile Strength
Collagen
Pressure

Keywords

  • Acid-etched dentin
  • Bis-GMA
  • Dentin bonding
  • Ethanol wet bonding
  • Hydrophobic resin

ASJC Scopus subject areas

  • Dentistry(all)

Cite this

Tay, F. C. M., Pashley, D. H., Kapur, R. R., Carrilho, M. R. O., Hur, Y. B., Garrett, L. V., & Tay, K. C. Y. (2007). Bonding BisGMA to dentin - A proof of concept for hydrophobic dentin bonding. Journal of Dental Research, 86(11), 1034-1039. https://doi.org/10.1177/154405910708601103

Bonding BisGMA to dentin - A proof of concept for hydrophobic dentin bonding. / Tay, Franklin Chi Meng; Pashley, David Henry; Kapur, R. R.; Carrilho, M. R.O.; Hur, Y. B.; Garrett, L. V.; Tay, K. C.Y.

In: Journal of Dental Research, Vol. 86, No. 11, 01.11.2007, p. 1034-1039.

Research output: Contribution to journalArticle

Tay, FCM, Pashley, DH, Kapur, RR, Carrilho, MRO, Hur, YB, Garrett, LV & Tay, KCY 2007, 'Bonding BisGMA to dentin - A proof of concept for hydrophobic dentin bonding', Journal of Dental Research, vol. 86, no. 11, pp. 1034-1039. https://doi.org/10.1177/154405910708601103
Tay, Franklin Chi Meng ; Pashley, David Henry ; Kapur, R. R. ; Carrilho, M. R.O. ; Hur, Y. B. ; Garrett, L. V. ; Tay, K. C.Y. / Bonding BisGMA to dentin - A proof of concept for hydrophobic dentin bonding. In: Journal of Dental Research. 2007 ; Vol. 86, No. 11. pp. 1034-1039.
@article{e15b909aa8d14f118f31bbbd946289cd,
title = "Bonding BisGMA to dentin - A proof of concept for hydrophobic dentin bonding",
abstract = "The use of TEGDMA as a diluent comonomer in the formulation of hydrophobic adhesives for ethanol wet-bonding is a concern, due to its leaching potential, higher water sorption, and bio-incompatibility. This study tested the hypothesis that hydrophobic bonding to acid-etched dentin may be accomplished with the use of ethanol-solvated BisGMA only. Phosphoric-acid-etched, oxalate-occluded, deep coronal dentin bonded under 20 cm water pressure with experimental BisGMA adhesives by ethanol wet-bonding exhibited tensile strengths that were not significantly different from that achieved with OptiBond FL bonded according to the manufacturer-recommended protocol, with similar acid-/base-resistant hybrid layers, resin tags, and nanoleakage distribution. Ethanol replacement of water-saturated dentin produced wider interfibrillar spaces, more extensive shrinkage of the collagen fibrils, and narrower hybrid layers. Experimental BisGMA adhesives provide the proof of concept that relatively hydrophobic resins may be coupled to acid-etched dentin by increasing its hydrophobic characteristics via ethanol replacement. They should be further optimized before clinical application.",
keywords = "Acid-etched dentin, Bis-GMA, Dentin bonding, Ethanol wet bonding, Hydrophobic resin",
author = "Tay, {Franklin Chi Meng} and Pashley, {David Henry} and Kapur, {R. R.} and Carrilho, {M. R.O.} and Hur, {Y. B.} and Garrett, {L. V.} and Tay, {K. C.Y.}",
year = "2007",
month = "11",
day = "1",
doi = "10.1177/154405910708601103",
language = "English (US)",
volume = "86",
pages = "1034--1039",
journal = "Journal of Dental Research",
issn = "0022-0345",
publisher = "SAGE Publications Inc.",
number = "11",

}

TY - JOUR

T1 - Bonding BisGMA to dentin - A proof of concept for hydrophobic dentin bonding

AU - Tay, Franklin Chi Meng

AU - Pashley, David Henry

AU - Kapur, R. R.

AU - Carrilho, M. R.O.

AU - Hur, Y. B.

AU - Garrett, L. V.

AU - Tay, K. C.Y.

PY - 2007/11/1

Y1 - 2007/11/1

N2 - The use of TEGDMA as a diluent comonomer in the formulation of hydrophobic adhesives for ethanol wet-bonding is a concern, due to its leaching potential, higher water sorption, and bio-incompatibility. This study tested the hypothesis that hydrophobic bonding to acid-etched dentin may be accomplished with the use of ethanol-solvated BisGMA only. Phosphoric-acid-etched, oxalate-occluded, deep coronal dentin bonded under 20 cm water pressure with experimental BisGMA adhesives by ethanol wet-bonding exhibited tensile strengths that were not significantly different from that achieved with OptiBond FL bonded according to the manufacturer-recommended protocol, with similar acid-/base-resistant hybrid layers, resin tags, and nanoleakage distribution. Ethanol replacement of water-saturated dentin produced wider interfibrillar spaces, more extensive shrinkage of the collagen fibrils, and narrower hybrid layers. Experimental BisGMA adhesives provide the proof of concept that relatively hydrophobic resins may be coupled to acid-etched dentin by increasing its hydrophobic characteristics via ethanol replacement. They should be further optimized before clinical application.

AB - The use of TEGDMA as a diluent comonomer in the formulation of hydrophobic adhesives for ethanol wet-bonding is a concern, due to its leaching potential, higher water sorption, and bio-incompatibility. This study tested the hypothesis that hydrophobic bonding to acid-etched dentin may be accomplished with the use of ethanol-solvated BisGMA only. Phosphoric-acid-etched, oxalate-occluded, deep coronal dentin bonded under 20 cm water pressure with experimental BisGMA adhesives by ethanol wet-bonding exhibited tensile strengths that were not significantly different from that achieved with OptiBond FL bonded according to the manufacturer-recommended protocol, with similar acid-/base-resistant hybrid layers, resin tags, and nanoleakage distribution. Ethanol replacement of water-saturated dentin produced wider interfibrillar spaces, more extensive shrinkage of the collagen fibrils, and narrower hybrid layers. Experimental BisGMA adhesives provide the proof of concept that relatively hydrophobic resins may be coupled to acid-etched dentin by increasing its hydrophobic characteristics via ethanol replacement. They should be further optimized before clinical application.

KW - Acid-etched dentin

KW - Bis-GMA

KW - Dentin bonding

KW - Ethanol wet bonding

KW - Hydrophobic resin

UR - http://www.scopus.com/inward/record.url?scp=36549018726&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=36549018726&partnerID=8YFLogxK

U2 - 10.1177/154405910708601103

DO - 10.1177/154405910708601103

M3 - Article

VL - 86

SP - 1034

EP - 1039

JO - Journal of Dental Research

JF - Journal of Dental Research

SN - 0022-0345

IS - 11

ER -