Calibration of FTIR conversion analysis of contemporary dental resin composites

F. A. Rueggeberg, D. T. Hashinger, C. W. Fairhurst

Research output: Contribution to journalArticle

222 Citations (Scopus)

Abstract

Composite restorative material has undergone gradual change in composition since its introduction in the 1960's. Early commercial resins were mixtures of BIS-GMA and TEGDMA. Today, these mixtures are still present, but urethane dimethacrylates and large oligomeric structures of BIS-GMA-urethanes exist. Because of these changes in composition, the past methods of calculating monomer conversion by means of infrared spectroscopy may need modification. This research investigates different methods used to formulate calibration curves for determination of monomer conversion by infrared spectroscopy of contemporary commercial composites containing aromatic structures. Conversion calibration procedures using various baseline methods with BIS-GMA, Bisphenol-A/TEGDMA, and a hydrogenated bonding resin were established. Both peak and area infrared absorptions were determined. One particular baseline method proved the best fit to the Beer-Lambert law. Bisphenol-A was found unsuitable as an infrared calibration model for resin composites. The BIS-GMA/TEGDMA calibration model closely simulates conversion values obtained when a hydrogenated commercial resin model was used.

Original languageEnglish (US)
Pages (from-to)241-249
Number of pages9
JournalDental Materials
Volume6
Issue number4
DOIs
StatePublished - Oct 1990

Fingerprint

Fourier Transform Infrared Spectroscopy
Calibration
Resins
Composite materials
Infrared spectroscopy
Monomers
Spectrum Analysis
Composite Resins
Urethane
Infrared absorption
Chemical analysis
Infrared radiation
Composite Dental Resin
triethylene glycol dimethacrylate
Research
bisphenol A

ASJC Scopus subject areas

  • Materials Science(all)
  • Dentistry(all)
  • Mechanics of Materials

Cite this

Calibration of FTIR conversion analysis of contemporary dental resin composites. / Rueggeberg, F. A.; Hashinger, D. T.; Fairhurst, C. W.

In: Dental Materials, Vol. 6, No. 4, 10.1990, p. 241-249.

Research output: Contribution to journalArticle

Rueggeberg, F. A. ; Hashinger, D. T. ; Fairhurst, C. W. / Calibration of FTIR conversion analysis of contemporary dental resin composites. In: Dental Materials. 1990 ; Vol. 6, No. 4. pp. 241-249.
@article{ed243316290744a58baee33e7c1df8c3,
title = "Calibration of FTIR conversion analysis of contemporary dental resin composites",
abstract = "Composite restorative material has undergone gradual change in composition since its introduction in the 1960's. Early commercial resins were mixtures of BIS-GMA and TEGDMA. Today, these mixtures are still present, but urethane dimethacrylates and large oligomeric structures of BIS-GMA-urethanes exist. Because of these changes in composition, the past methods of calculating monomer conversion by means of infrared spectroscopy may need modification. This research investigates different methods used to formulate calibration curves for determination of monomer conversion by infrared spectroscopy of contemporary commercial composites containing aromatic structures. Conversion calibration procedures using various baseline methods with BIS-GMA, Bisphenol-A/TEGDMA, and a hydrogenated bonding resin were established. Both peak and area infrared absorptions were determined. One particular baseline method proved the best fit to the Beer-Lambert law. Bisphenol-A was found unsuitable as an infrared calibration model for resin composites. The BIS-GMA/TEGDMA calibration model closely simulates conversion values obtained when a hydrogenated commercial resin model was used.",
author = "Rueggeberg, {F. A.} and Hashinger, {D. T.} and Fairhurst, {C. W.}",
year = "1990",
month = "10",
doi = "10.1016/S0109-5641(05)80005-3",
language = "English (US)",
volume = "6",
pages = "241--249",
journal = "Dental Materials",
issn = "0109-5641",
publisher = "Elsevier Science",
number = "4",

}

TY - JOUR

T1 - Calibration of FTIR conversion analysis of contemporary dental resin composites

AU - Rueggeberg, F. A.

AU - Hashinger, D. T.

AU - Fairhurst, C. W.

PY - 1990/10

Y1 - 1990/10

N2 - Composite restorative material has undergone gradual change in composition since its introduction in the 1960's. Early commercial resins were mixtures of BIS-GMA and TEGDMA. Today, these mixtures are still present, but urethane dimethacrylates and large oligomeric structures of BIS-GMA-urethanes exist. Because of these changes in composition, the past methods of calculating monomer conversion by means of infrared spectroscopy may need modification. This research investigates different methods used to formulate calibration curves for determination of monomer conversion by infrared spectroscopy of contemporary commercial composites containing aromatic structures. Conversion calibration procedures using various baseline methods with BIS-GMA, Bisphenol-A/TEGDMA, and a hydrogenated bonding resin were established. Both peak and area infrared absorptions were determined. One particular baseline method proved the best fit to the Beer-Lambert law. Bisphenol-A was found unsuitable as an infrared calibration model for resin composites. The BIS-GMA/TEGDMA calibration model closely simulates conversion values obtained when a hydrogenated commercial resin model was used.

AB - Composite restorative material has undergone gradual change in composition since its introduction in the 1960's. Early commercial resins were mixtures of BIS-GMA and TEGDMA. Today, these mixtures are still present, but urethane dimethacrylates and large oligomeric structures of BIS-GMA-urethanes exist. Because of these changes in composition, the past methods of calculating monomer conversion by means of infrared spectroscopy may need modification. This research investigates different methods used to formulate calibration curves for determination of monomer conversion by infrared spectroscopy of contemporary commercial composites containing aromatic structures. Conversion calibration procedures using various baseline methods with BIS-GMA, Bisphenol-A/TEGDMA, and a hydrogenated bonding resin were established. Both peak and area infrared absorptions were determined. One particular baseline method proved the best fit to the Beer-Lambert law. Bisphenol-A was found unsuitable as an infrared calibration model for resin composites. The BIS-GMA/TEGDMA calibration model closely simulates conversion values obtained when a hydrogenated commercial resin model was used.

UR - http://www.scopus.com/inward/record.url?scp=0025501765&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0025501765&partnerID=8YFLogxK

U2 - 10.1016/S0109-5641(05)80005-3

DO - 10.1016/S0109-5641(05)80005-3

M3 - Article

C2 - 2150824

AN - SCOPUS:0025501765

VL - 6

SP - 241

EP - 249

JO - Dental Materials

JF - Dental Materials

SN - 0109-5641

IS - 4

ER -