Characterization of inorganic filler content, mechanical properties, and light transmission of bulk-fill resin composites

B. M. Fronza, A. P.A. Ayres, R. R. Pacheco, F. A. Rueggeberg, C. T.S. Dias, M. Giannini

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Objectives: The aims of this study were to characterize inorganic content (IC), light transmission (LT), biaxial flexural strength (BFS), and flexural modulus (FM) of one conventional (layered) and four bulk-fill composites at different depths. Methods: Bulk-fill composites tested were Surefil SDR flow (SDR), Filtek Bulk Fill (FBF), Tetric EvoCeram Bulk Fill (TEC), and EverX Posterior (EXP). Herculite Classic (HER) was used as a control. Energy dispersive x-ray analysis and scanning electron microscopy were used to characterize filler particle composition and morphology. The LT through different composite thicknesses (1, 2, 3, and 4 mm) was measured using a laboratory-grade spectral radiometer system (n=5). For the BFS and FM tests, sets of eight stacked composite discs (0.5-mm thick) were prepared simulating bulk filling of a 4-mm-thick increment (n=8). Results: SDR demonstrated larger, irregular particles than those observed in TEC or HER. Filler particles in FBF were spherical, while those in EXP were composed of fiberglass strands. The LT decreased with increased composite thickness for all materials. Bulk-fill composites allowed higher LT than the HER. Furthermore, HER proved to be the unique material, having lower BFS values at deeper regions. SDR, FBF, and TEC bulk-fill composites presented reduced FM with increasing composite depth. Conclusions: The bulk-fill composites investigated exhibited higher LT, independent of different filler content and characteristics. Although an increase in composite thickness reduced LT, the BFS of bulk-fill composites at deeper layers was not compromised.

Original languageEnglish (US)
Pages (from-to)445-455
Number of pages11
JournalOperative dentistry
Volume42
Issue number4
DOIs
StatePublished - Jul 1 2017

Fingerprint

Composite Resins
Light
Electron Scanning Microscopy
X-Rays

ASJC Scopus subject areas

  • Dentistry(all)

Cite this

Characterization of inorganic filler content, mechanical properties, and light transmission of bulk-fill resin composites. / Fronza, B. M.; Ayres, A. P.A.; Pacheco, R. R.; Rueggeberg, F. A.; Dias, C. T.S.; Giannini, M.

In: Operative dentistry, Vol. 42, No. 4, 01.07.2017, p. 445-455.

Research output: Contribution to journalArticle

Fronza, B. M. ; Ayres, A. P.A. ; Pacheco, R. R. ; Rueggeberg, F. A. ; Dias, C. T.S. ; Giannini, M. / Characterization of inorganic filler content, mechanical properties, and light transmission of bulk-fill resin composites. In: Operative dentistry. 2017 ; Vol. 42, No. 4. pp. 445-455.
@article{e1e7d07c93a74be0b5bcb9867b299b51,
title = "Characterization of inorganic filler content, mechanical properties, and light transmission of bulk-fill resin composites",
abstract = "Objectives: The aims of this study were to characterize inorganic content (IC), light transmission (LT), biaxial flexural strength (BFS), and flexural modulus (FM) of one conventional (layered) and four bulk-fill composites at different depths. Methods: Bulk-fill composites tested were Surefil SDR flow (SDR), Filtek Bulk Fill (FBF), Tetric EvoCeram Bulk Fill (TEC), and EverX Posterior (EXP). Herculite Classic (HER) was used as a control. Energy dispersive x-ray analysis and scanning electron microscopy were used to characterize filler particle composition and morphology. The LT through different composite thicknesses (1, 2, 3, and 4 mm) was measured using a laboratory-grade spectral radiometer system (n=5). For the BFS and FM tests, sets of eight stacked composite discs (0.5-mm thick) were prepared simulating bulk filling of a 4-mm-thick increment (n=8). Results: SDR demonstrated larger, irregular particles than those observed in TEC or HER. Filler particles in FBF were spherical, while those in EXP were composed of fiberglass strands. The LT decreased with increased composite thickness for all materials. Bulk-fill composites allowed higher LT than the HER. Furthermore, HER proved to be the unique material, having lower BFS values at deeper regions. SDR, FBF, and TEC bulk-fill composites presented reduced FM with increasing composite depth. Conclusions: The bulk-fill composites investigated exhibited higher LT, independent of different filler content and characteristics. Although an increase in composite thickness reduced LT, the BFS of bulk-fill composites at deeper layers was not compromised.",
author = "Fronza, {B. M.} and Ayres, {A. P.A.} and Pacheco, {R. R.} and Rueggeberg, {F. A.} and Dias, {C. T.S.} and M. Giannini",
year = "2017",
month = "7",
day = "1",
doi = "10.2341/16-024-L",
language = "English (US)",
volume = "42",
pages = "445--455",
journal = "Operative Dentistry",
issn = "0361-7734",
publisher = "Indiana University School of Dentistry",
number = "4",

}

TY - JOUR

T1 - Characterization of inorganic filler content, mechanical properties, and light transmission of bulk-fill resin composites

AU - Fronza, B. M.

AU - Ayres, A. P.A.

AU - Pacheco, R. R.

AU - Rueggeberg, F. A.

AU - Dias, C. T.S.

AU - Giannini, M.

PY - 2017/7/1

Y1 - 2017/7/1

N2 - Objectives: The aims of this study were to characterize inorganic content (IC), light transmission (LT), biaxial flexural strength (BFS), and flexural modulus (FM) of one conventional (layered) and four bulk-fill composites at different depths. Methods: Bulk-fill composites tested were Surefil SDR flow (SDR), Filtek Bulk Fill (FBF), Tetric EvoCeram Bulk Fill (TEC), and EverX Posterior (EXP). Herculite Classic (HER) was used as a control. Energy dispersive x-ray analysis and scanning electron microscopy were used to characterize filler particle composition and morphology. The LT through different composite thicknesses (1, 2, 3, and 4 mm) was measured using a laboratory-grade spectral radiometer system (n=5). For the BFS and FM tests, sets of eight stacked composite discs (0.5-mm thick) were prepared simulating bulk filling of a 4-mm-thick increment (n=8). Results: SDR demonstrated larger, irregular particles than those observed in TEC or HER. Filler particles in FBF were spherical, while those in EXP were composed of fiberglass strands. The LT decreased with increased composite thickness for all materials. Bulk-fill composites allowed higher LT than the HER. Furthermore, HER proved to be the unique material, having lower BFS values at deeper regions. SDR, FBF, and TEC bulk-fill composites presented reduced FM with increasing composite depth. Conclusions: The bulk-fill composites investigated exhibited higher LT, independent of different filler content and characteristics. Although an increase in composite thickness reduced LT, the BFS of bulk-fill composites at deeper layers was not compromised.

AB - Objectives: The aims of this study were to characterize inorganic content (IC), light transmission (LT), biaxial flexural strength (BFS), and flexural modulus (FM) of one conventional (layered) and four bulk-fill composites at different depths. Methods: Bulk-fill composites tested were Surefil SDR flow (SDR), Filtek Bulk Fill (FBF), Tetric EvoCeram Bulk Fill (TEC), and EverX Posterior (EXP). Herculite Classic (HER) was used as a control. Energy dispersive x-ray analysis and scanning electron microscopy were used to characterize filler particle composition and morphology. The LT through different composite thicknesses (1, 2, 3, and 4 mm) was measured using a laboratory-grade spectral radiometer system (n=5). For the BFS and FM tests, sets of eight stacked composite discs (0.5-mm thick) were prepared simulating bulk filling of a 4-mm-thick increment (n=8). Results: SDR demonstrated larger, irregular particles than those observed in TEC or HER. Filler particles in FBF were spherical, while those in EXP were composed of fiberglass strands. The LT decreased with increased composite thickness for all materials. Bulk-fill composites allowed higher LT than the HER. Furthermore, HER proved to be the unique material, having lower BFS values at deeper regions. SDR, FBF, and TEC bulk-fill composites presented reduced FM with increasing composite depth. Conclusions: The bulk-fill composites investigated exhibited higher LT, independent of different filler content and characteristics. Although an increase in composite thickness reduced LT, the BFS of bulk-fill composites at deeper layers was not compromised.

UR - http://www.scopus.com/inward/record.url?scp=85022331361&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85022331361&partnerID=8YFLogxK

U2 - 10.2341/16-024-L

DO - 10.2341/16-024-L

M3 - Article

VL - 42

SP - 445

EP - 455

JO - Operative Dentistry

JF - Operative Dentistry

SN - 0361-7734

IS - 4

ER -