Effect of filler content on the microtensile bond strength of composite resin and dentin in class i cavities

Bing Han, Yanmei Dong, Xuejun Gao, Xiaoyan Wang, Fucong Tian

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Objective: To investigate the effect of filler content on microtensile bond strength (µ-TBS) in Class I cavities. Method and Materials: Experimental composites with filler contents of 80%, 76%, 70%. 60%. and 50% by weight were used. Polymerization shrinkage was measured with Acuvol. and a three-point flexural test was performed to determine flexural properties. For evaluation of µ-TBS. 25 extracted human molars were randomly divided into five groups and Class I cavities were prepared. After filling with one of the experimental composites and curing for 40 seconds, teeth were serially sectioned perpendicular to the cavity floor. Stick-shaped samples were tested with a microtensile tester. Statistical analysis was conducted using ANOVA and Pearson correlation tests. Results: Significant correlations were found between filler content and polymerization shrinkage (r = -0.973. P< .05) and the filler content and Young modulus (r = 0.891, P< .05). Different filler contents in the experimental composites had no significant effect on p-TBS or flexural strength. Conclusion: In a Class I cavity model, this in vitro study showed that the filler content did not influence the flexural strength of experimental composite resins and had no effect on the microtensile bond strength between composite resin and dentin.

Original languageEnglish (US)
Pages (from-to)e16-e22
JournalQuintessence international
Volume43
Issue number2
StatePublished - Jan 1 2012

Fingerprint

Composite Resins
Dentin
Polymerization
Elastic Modulus
Analysis of Variance
Tooth
Weights and Measures
In Vitro Techniques

Keywords

  • Composite resins
  • Filler content
  • Flexural modulus
  • Flowable composites
  • Microtensile bond strength
  • Polymerization shrinkage

ASJC Scopus subject areas

  • Dentistry(all)

Cite this

Effect of filler content on the microtensile bond strength of composite resin and dentin in class i cavities. / Han, Bing; Dong, Yanmei; Gao, Xuejun; Wang, Xiaoyan; Tian, Fucong.

In: Quintessence international, Vol. 43, No. 2, 01.01.2012, p. e16-e22.

Research output: Contribution to journalArticle

Han, Bing ; Dong, Yanmei ; Gao, Xuejun ; Wang, Xiaoyan ; Tian, Fucong. / Effect of filler content on the microtensile bond strength of composite resin and dentin in class i cavities. In: Quintessence international. 2012 ; Vol. 43, No. 2. pp. e16-e22.
@article{69ba2e9026e644cfaa2656871ecdeb53,
title = "Effect of filler content on the microtensile bond strength of composite resin and dentin in class i cavities",
abstract = "Objective: To investigate the effect of filler content on microtensile bond strength (µ-TBS) in Class I cavities. Method and Materials: Experimental composites with filler contents of 80{\%}, 76{\%}, 70{\%}. 60{\%}. and 50{\%} by weight were used. Polymerization shrinkage was measured with Acuvol. and a three-point flexural test was performed to determine flexural properties. For evaluation of µ-TBS. 25 extracted human molars were randomly divided into five groups and Class I cavities were prepared. After filling with one of the experimental composites and curing for 40 seconds, teeth were serially sectioned perpendicular to the cavity floor. Stick-shaped samples were tested with a microtensile tester. Statistical analysis was conducted using ANOVA and Pearson correlation tests. Results: Significant correlations were found between filler content and polymerization shrinkage (r = -0.973. P< .05) and the filler content and Young modulus (r = 0.891, P< .05). Different filler contents in the experimental composites had no significant effect on p-TBS or flexural strength. Conclusion: In a Class I cavity model, this in vitro study showed that the filler content did not influence the flexural strength of experimental composite resins and had no effect on the microtensile bond strength between composite resin and dentin.",
keywords = "Composite resins, Filler content, Flexural modulus, Flowable composites, Microtensile bond strength, Polymerization shrinkage",
author = "Bing Han and Yanmei Dong and Xuejun Gao and Xiaoyan Wang and Fucong Tian",
year = "2012",
month = "1",
day = "1",
language = "English (US)",
volume = "43",
pages = "e16--e22",
journal = "Quintessence international (Berlin, Germany : 1985)",
issn = "0033-6572",
publisher = "Quintessence Publishing Company",
number = "2",

}

TY - JOUR

T1 - Effect of filler content on the microtensile bond strength of composite resin and dentin in class i cavities

AU - Han, Bing

AU - Dong, Yanmei

AU - Gao, Xuejun

AU - Wang, Xiaoyan

AU - Tian, Fucong

PY - 2012/1/1

Y1 - 2012/1/1

N2 - Objective: To investigate the effect of filler content on microtensile bond strength (µ-TBS) in Class I cavities. Method and Materials: Experimental composites with filler contents of 80%, 76%, 70%. 60%. and 50% by weight were used. Polymerization shrinkage was measured with Acuvol. and a three-point flexural test was performed to determine flexural properties. For evaluation of µ-TBS. 25 extracted human molars were randomly divided into five groups and Class I cavities were prepared. After filling with one of the experimental composites and curing for 40 seconds, teeth were serially sectioned perpendicular to the cavity floor. Stick-shaped samples were tested with a microtensile tester. Statistical analysis was conducted using ANOVA and Pearson correlation tests. Results: Significant correlations were found between filler content and polymerization shrinkage (r = -0.973. P< .05) and the filler content and Young modulus (r = 0.891, P< .05). Different filler contents in the experimental composites had no significant effect on p-TBS or flexural strength. Conclusion: In a Class I cavity model, this in vitro study showed that the filler content did not influence the flexural strength of experimental composite resins and had no effect on the microtensile bond strength between composite resin and dentin.

AB - Objective: To investigate the effect of filler content on microtensile bond strength (µ-TBS) in Class I cavities. Method and Materials: Experimental composites with filler contents of 80%, 76%, 70%. 60%. and 50% by weight were used. Polymerization shrinkage was measured with Acuvol. and a three-point flexural test was performed to determine flexural properties. For evaluation of µ-TBS. 25 extracted human molars were randomly divided into five groups and Class I cavities were prepared. After filling with one of the experimental composites and curing for 40 seconds, teeth were serially sectioned perpendicular to the cavity floor. Stick-shaped samples were tested with a microtensile tester. Statistical analysis was conducted using ANOVA and Pearson correlation tests. Results: Significant correlations were found between filler content and polymerization shrinkage (r = -0.973. P< .05) and the filler content and Young modulus (r = 0.891, P< .05). Different filler contents in the experimental composites had no significant effect on p-TBS or flexural strength. Conclusion: In a Class I cavity model, this in vitro study showed that the filler content did not influence the flexural strength of experimental composite resins and had no effect on the microtensile bond strength between composite resin and dentin.

KW - Composite resins

KW - Filler content

KW - Flexural modulus

KW - Flowable composites

KW - Microtensile bond strength

KW - Polymerization shrinkage

UR - http://www.scopus.com/inward/record.url?scp=84862309607&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84862309607&partnerID=8YFLogxK

M3 - Article

C2 - 22257879

AN - SCOPUS:84862309607

VL - 43

SP - e16-e22

JO - Quintessence international (Berlin, Germany : 1985)

JF - Quintessence international (Berlin, Germany : 1985)

SN - 0033-6572

IS - 2

ER -