Effect of smear layers on the bonding of a self-etching primer to dentin

Franklin Chi Meng Tay, Ricardo Carvalho, Hidehiko Sano, David Henry Pashley

Research output: Contribution to journalArticle

147 Citations (Scopus)

Abstract

Reprint requests: Dr. David H. Pashley, Department of Oral Biology and Maxillofacial Pathology, School of Dentistry, Medical College of Georgia, Augusta, Georgia 30912-1129, USA. Tel: +1-706-721-2033, Fax: +1-706-721-6252, e-mail: dpashley@mail.mcg.edu Purpose: The objective of this work was to evaluate the effect of the absence and presence of smear lay- . ers on bonds made to dentin using a self-etching primer system, Clearfil SE Bond. Materials and Methods: Dentin surfaces with different smear layer thickness were created from mid-coronal sound dentin in extracted, human third molars. The control group was cryofractured to create a bonding surface that was devoid of a smear layer. The experimental teeth were ground with wet 60-, 180- or 600-grit SiC paper. They were bonded using SE Bond, followed by resin composite buildups. After 1 day, bonded specimens were sectioned into multiple 1- × 1-mm beams. Microtensile bond strengths were determined and the results analyzed with ANOVA and the Student Neuman Keuls test. Fractographic study of cross sections of failed interfaces from the dentin side of representative beams was performed using both SEM and TEM. Results: SE Bond produced high bond strengths (ca 50 MPa) to both smear layer-free and smear layer-covered dentin. SEM examination was inadequate to define the exact nature of interfacial failures. TEM observations demonstrated a thin (ca 400 to 500 nm) hybrid layer in the fractured dentin and thicker (ca 1 to 4 urn) hybrid layers on smear layer-covered dentin. This included a thick, hybridized smear layer and a thin, underlying true hybrid layer in the intact dentin. Separation of the two hybrid layers was not evident in interfacial failures. Conclusion: Self-etching primers create thin hybrid layers that incorporate the smear layer. This study shows that formation of true hybrid layers occurs irrespective of smear layer thickness and that both hybrid layers may function as a unit during loading without separation. Identification of secondary cracks from TEM fractographic analysis exemplifies the complex reaction to tensile stresses in multilayered joint systems that comprise materials of variable compliance.

Original languageEnglish (US)
Pages (from-to)99-116
Number of pages18
JournalJournal of Adhesive Dentistry
Volume2
Issue number2
StatePublished - Dec 1 2000

Fingerprint

Smear Layer
Dentin
Postal Service
Telefacsimile
School Dentistry
Oral Pathology
Third Molar
Composite Resins
Compliance
Analysis of Variance
Tooth
Joints
Students
Control Groups

ASJC Scopus subject areas

  • Orthodontics
  • Oral Surgery
  • Periodontics

Cite this

Effect of smear layers on the bonding of a self-etching primer to dentin. / Tay, Franklin Chi Meng; Carvalho, Ricardo; Sano, Hidehiko; Pashley, David Henry.

In: Journal of Adhesive Dentistry, Vol. 2, No. 2, 01.12.2000, p. 99-116.

Research output: Contribution to journalArticle

Tay, FCM, Carvalho, R, Sano, H & Pashley, DH 2000, 'Effect of smear layers on the bonding of a self-etching primer to dentin', Journal of Adhesive Dentistry, vol. 2, no. 2, pp. 99-116.
Tay, Franklin Chi Meng ; Carvalho, Ricardo ; Sano, Hidehiko ; Pashley, David Henry. / Effect of smear layers on the bonding of a self-etching primer to dentin. In: Journal of Adhesive Dentistry. 2000 ; Vol. 2, No. 2. pp. 99-116.
@article{6600ec084c5a4dae90d656ef8fdbdda5,
title = "Effect of smear layers on the bonding of a self-etching primer to dentin",
abstract = "Reprint requests: Dr. David H. Pashley, Department of Oral Biology and Maxillofacial Pathology, School of Dentistry, Medical College of Georgia, Augusta, Georgia 30912-1129, USA. Tel: +1-706-721-2033, Fax: +1-706-721-6252, e-mail: dpashley@mail.mcg.edu Purpose: The objective of this work was to evaluate the effect of the absence and presence of smear lay- . ers on bonds made to dentin using a self-etching primer system, Clearfil SE Bond. Materials and Methods: Dentin surfaces with different smear layer thickness were created from mid-coronal sound dentin in extracted, human third molars. The control group was cryofractured to create a bonding surface that was devoid of a smear layer. The experimental teeth were ground with wet 60-, 180- or 600-grit SiC paper. They were bonded using SE Bond, followed by resin composite buildups. After 1 day, bonded specimens were sectioned into multiple 1- × 1-mm beams. Microtensile bond strengths were determined and the results analyzed with ANOVA and the Student Neuman Keuls test. Fractographic study of cross sections of failed interfaces from the dentin side of representative beams was performed using both SEM and TEM. Results: SE Bond produced high bond strengths (ca 50 MPa) to both smear layer-free and smear layer-covered dentin. SEM examination was inadequate to define the exact nature of interfacial failures. TEM observations demonstrated a thin (ca 400 to 500 nm) hybrid layer in the fractured dentin and thicker (ca 1 to 4 urn) hybrid layers on smear layer-covered dentin. This included a thick, hybridized smear layer and a thin, underlying true hybrid layer in the intact dentin. Separation of the two hybrid layers was not evident in interfacial failures. Conclusion: Self-etching primers create thin hybrid layers that incorporate the smear layer. This study shows that formation of true hybrid layers occurs irrespective of smear layer thickness and that both hybrid layers may function as a unit during loading without separation. Identification of secondary cracks from TEM fractographic analysis exemplifies the complex reaction to tensile stresses in multilayered joint systems that comprise materials of variable compliance.",
author = "Tay, {Franklin Chi Meng} and Ricardo Carvalho and Hidehiko Sano and Pashley, {David Henry}",
year = "2000",
month = "12",
day = "1",
language = "English (US)",
volume = "2",
pages = "99--116",
journal = "The journal of adhesive dentistry",
issn = "1461-5185",
publisher = "Quintessence Publishing Company",
number = "2",

}

TY - JOUR

T1 - Effect of smear layers on the bonding of a self-etching primer to dentin

AU - Tay, Franklin Chi Meng

AU - Carvalho, Ricardo

AU - Sano, Hidehiko

AU - Pashley, David Henry

PY - 2000/12/1

Y1 - 2000/12/1

N2 - Reprint requests: Dr. David H. Pashley, Department of Oral Biology and Maxillofacial Pathology, School of Dentistry, Medical College of Georgia, Augusta, Georgia 30912-1129, USA. Tel: +1-706-721-2033, Fax: +1-706-721-6252, e-mail: dpashley@mail.mcg.edu Purpose: The objective of this work was to evaluate the effect of the absence and presence of smear lay- . ers on bonds made to dentin using a self-etching primer system, Clearfil SE Bond. Materials and Methods: Dentin surfaces with different smear layer thickness were created from mid-coronal sound dentin in extracted, human third molars. The control group was cryofractured to create a bonding surface that was devoid of a smear layer. The experimental teeth were ground with wet 60-, 180- or 600-grit SiC paper. They were bonded using SE Bond, followed by resin composite buildups. After 1 day, bonded specimens were sectioned into multiple 1- × 1-mm beams. Microtensile bond strengths were determined and the results analyzed with ANOVA and the Student Neuman Keuls test. Fractographic study of cross sections of failed interfaces from the dentin side of representative beams was performed using both SEM and TEM. Results: SE Bond produced high bond strengths (ca 50 MPa) to both smear layer-free and smear layer-covered dentin. SEM examination was inadequate to define the exact nature of interfacial failures. TEM observations demonstrated a thin (ca 400 to 500 nm) hybrid layer in the fractured dentin and thicker (ca 1 to 4 urn) hybrid layers on smear layer-covered dentin. This included a thick, hybridized smear layer and a thin, underlying true hybrid layer in the intact dentin. Separation of the two hybrid layers was not evident in interfacial failures. Conclusion: Self-etching primers create thin hybrid layers that incorporate the smear layer. This study shows that formation of true hybrid layers occurs irrespective of smear layer thickness and that both hybrid layers may function as a unit during loading without separation. Identification of secondary cracks from TEM fractographic analysis exemplifies the complex reaction to tensile stresses in multilayered joint systems that comprise materials of variable compliance.

AB - Reprint requests: Dr. David H. Pashley, Department of Oral Biology and Maxillofacial Pathology, School of Dentistry, Medical College of Georgia, Augusta, Georgia 30912-1129, USA. Tel: +1-706-721-2033, Fax: +1-706-721-6252, e-mail: dpashley@mail.mcg.edu Purpose: The objective of this work was to evaluate the effect of the absence and presence of smear lay- . ers on bonds made to dentin using a self-etching primer system, Clearfil SE Bond. Materials and Methods: Dentin surfaces with different smear layer thickness were created from mid-coronal sound dentin in extracted, human third molars. The control group was cryofractured to create a bonding surface that was devoid of a smear layer. The experimental teeth were ground with wet 60-, 180- or 600-grit SiC paper. They were bonded using SE Bond, followed by resin composite buildups. After 1 day, bonded specimens were sectioned into multiple 1- × 1-mm beams. Microtensile bond strengths were determined and the results analyzed with ANOVA and the Student Neuman Keuls test. Fractographic study of cross sections of failed interfaces from the dentin side of representative beams was performed using both SEM and TEM. Results: SE Bond produced high bond strengths (ca 50 MPa) to both smear layer-free and smear layer-covered dentin. SEM examination was inadequate to define the exact nature of interfacial failures. TEM observations demonstrated a thin (ca 400 to 500 nm) hybrid layer in the fractured dentin and thicker (ca 1 to 4 urn) hybrid layers on smear layer-covered dentin. This included a thick, hybridized smear layer and a thin, underlying true hybrid layer in the intact dentin. Separation of the two hybrid layers was not evident in interfacial failures. Conclusion: Self-etching primers create thin hybrid layers that incorporate the smear layer. This study shows that formation of true hybrid layers occurs irrespective of smear layer thickness and that both hybrid layers may function as a unit during loading without separation. Identification of secondary cracks from TEM fractographic analysis exemplifies the complex reaction to tensile stresses in multilayered joint systems that comprise materials of variable compliance.

UR - http://www.scopus.com/inward/record.url?scp=0034208769&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0034208769&partnerID=8YFLogxK

M3 - Article

C2 - 11317405

AN - SCOPUS:0034208769

VL - 2

SP - 99

EP - 116

JO - The journal of adhesive dentistry

JF - The journal of adhesive dentistry

SN - 1461-5185

IS - 2

ER -