Effects of oxalate on dentin bond after 3-month simulated pulpal pressure

Viracha Vachiramon, Marcos A. Vargas, David Henry Pashley, Franklin Chi Meng Tay, Saulo Geraldeli, Fang Qian, Steven R. Armstrong

Research output: Contribution to journalArticle

19 Citations (Scopus)

Abstract

Objectives: Application of an acidic oxalate solution forms calcium oxalate within dentinal tubules and has been used to desensitize dentin and may also improve performance by reducing internal dentin wetness during bonding. The hypothesis tested was that oxalate restriction of dentinal fluid transudation when using an etch-and-rinse two-step adhesive will improve microtensile bond strength (μTBS) and reduce nanoleakage. Methods: Occlusal dentin of 60 human molars were bonded (Adper Single Bond Plus, 3M ESPE) while one-half of each tooth received either a liquid (SuperSeal, Phoenix Dental) or gel (BisBlock, Bisco) oxalate treatment after acid etching. The restored teeth were placed under pulpal pressure for 3 months before forming cylindrical dumbbell specimens for μTBS and failure pathway determination. Additional teeth were prepared and stored in a similar manner for transmission electron microscopy (TEM) examination of nanoleakage after tracer immersion. Results: The mean bond strength in the group with oxalate liquid and the control group was 27.06 ± 7.14 and 36.18 ± 9.07 MPa, respectively, and for the gel form of oxalate was 25.34 ± 13.09 and 33.09 ± 14.25 MPa, respectively. The control groups were significantly stronger than either oxalate group using t-tests (liquid p < 0.00001; gel p = 0.0032) or Weibull (liquid p = 0.0002; gel p = 0.0029) statistics. Oxalate groups also demonstrated more adhesive failure modes and nanoleakage. Conclusions: Under the conditions of this study, the application of oxalate with an etch-and-rinse two-step bonding system produced significantly lower long-term μTBS and enhanced nanoleakage.

Original languageEnglish (US)
Pages (from-to)178-185
Number of pages8
JournalJournal of Dentistry
Volume36
Issue number3
DOIs
StatePublished - Mar 1 2008

Fingerprint

Oxalates
Dentin
Pressure
Tooth
Gels
Adhesives
Dentinal Fluid
Calcium Oxalate
Control Groups
Immersion
Transmission Electron Microscopy
Acids

Keywords

  • Dentin bond strength
  • Dentin permeability
  • Durability
  • Etch-and-rinse two-step
  • Oxalate desensitizer

ASJC Scopus subject areas

  • Dentistry(all)

Cite this

Vachiramon, V., Vargas, M. A., Pashley, D. H., Tay, F. C. M., Geraldeli, S., Qian, F., & Armstrong, S. R. (2008). Effects of oxalate on dentin bond after 3-month simulated pulpal pressure. Journal of Dentistry, 36(3), 178-185. https://doi.org/10.1016/j.jdent.2007.11.011

Effects of oxalate on dentin bond after 3-month simulated pulpal pressure. / Vachiramon, Viracha; Vargas, Marcos A.; Pashley, David Henry; Tay, Franklin Chi Meng; Geraldeli, Saulo; Qian, Fang; Armstrong, Steven R.

In: Journal of Dentistry, Vol. 36, No. 3, 01.03.2008, p. 178-185.

Research output: Contribution to journalArticle

Vachiramon, V, Vargas, MA, Pashley, DH, Tay, FCM, Geraldeli, S, Qian, F & Armstrong, SR 2008, 'Effects of oxalate on dentin bond after 3-month simulated pulpal pressure', Journal of Dentistry, vol. 36, no. 3, pp. 178-185. https://doi.org/10.1016/j.jdent.2007.11.011
Vachiramon, Viracha ; Vargas, Marcos A. ; Pashley, David Henry ; Tay, Franklin Chi Meng ; Geraldeli, Saulo ; Qian, Fang ; Armstrong, Steven R. / Effects of oxalate on dentin bond after 3-month simulated pulpal pressure. In: Journal of Dentistry. 2008 ; Vol. 36, No. 3. pp. 178-185.
@article{9d8e270aa30f4c0db32deb227a97a4ca,
title = "Effects of oxalate on dentin bond after 3-month simulated pulpal pressure",
abstract = "Objectives: Application of an acidic oxalate solution forms calcium oxalate within dentinal tubules and has been used to desensitize dentin and may also improve performance by reducing internal dentin wetness during bonding. The hypothesis tested was that oxalate restriction of dentinal fluid transudation when using an etch-and-rinse two-step adhesive will improve microtensile bond strength (μTBS) and reduce nanoleakage. Methods: Occlusal dentin of 60 human molars were bonded (Adper Single Bond Plus, 3M ESPE) while one-half of each tooth received either a liquid (SuperSeal, Phoenix Dental) or gel (BisBlock, Bisco) oxalate treatment after acid etching. The restored teeth were placed under pulpal pressure for 3 months before forming cylindrical dumbbell specimens for μTBS and failure pathway determination. Additional teeth were prepared and stored in a similar manner for transmission electron microscopy (TEM) examination of nanoleakage after tracer immersion. Results: The mean bond strength in the group with oxalate liquid and the control group was 27.06 ± 7.14 and 36.18 ± 9.07 MPa, respectively, and for the gel form of oxalate was 25.34 ± 13.09 and 33.09 ± 14.25 MPa, respectively. The control groups were significantly stronger than either oxalate group using t-tests (liquid p < 0.00001; gel p = 0.0032) or Weibull (liquid p = 0.0002; gel p = 0.0029) statistics. Oxalate groups also demonstrated more adhesive failure modes and nanoleakage. Conclusions: Under the conditions of this study, the application of oxalate with an etch-and-rinse two-step bonding system produced significantly lower long-term μTBS and enhanced nanoleakage.",
keywords = "Dentin bond strength, Dentin permeability, Durability, Etch-and-rinse two-step, Oxalate desensitizer",
author = "Viracha Vachiramon and Vargas, {Marcos A.} and Pashley, {David Henry} and Tay, {Franklin Chi Meng} and Saulo Geraldeli and Fang Qian and Armstrong, {Steven R.}",
year = "2008",
month = "3",
day = "1",
doi = "10.1016/j.jdent.2007.11.011",
language = "English (US)",
volume = "36",
pages = "178--185",
journal = "Journal of Dentistry",
issn = "0300-5712",
publisher = "Elsevier BV",
number = "3",

}

TY - JOUR

T1 - Effects of oxalate on dentin bond after 3-month simulated pulpal pressure

AU - Vachiramon, Viracha

AU - Vargas, Marcos A.

AU - Pashley, David Henry

AU - Tay, Franklin Chi Meng

AU - Geraldeli, Saulo

AU - Qian, Fang

AU - Armstrong, Steven R.

PY - 2008/3/1

Y1 - 2008/3/1

N2 - Objectives: Application of an acidic oxalate solution forms calcium oxalate within dentinal tubules and has been used to desensitize dentin and may also improve performance by reducing internal dentin wetness during bonding. The hypothesis tested was that oxalate restriction of dentinal fluid transudation when using an etch-and-rinse two-step adhesive will improve microtensile bond strength (μTBS) and reduce nanoleakage. Methods: Occlusal dentin of 60 human molars were bonded (Adper Single Bond Plus, 3M ESPE) while one-half of each tooth received either a liquid (SuperSeal, Phoenix Dental) or gel (BisBlock, Bisco) oxalate treatment after acid etching. The restored teeth were placed under pulpal pressure for 3 months before forming cylindrical dumbbell specimens for μTBS and failure pathway determination. Additional teeth were prepared and stored in a similar manner for transmission electron microscopy (TEM) examination of nanoleakage after tracer immersion. Results: The mean bond strength in the group with oxalate liquid and the control group was 27.06 ± 7.14 and 36.18 ± 9.07 MPa, respectively, and for the gel form of oxalate was 25.34 ± 13.09 and 33.09 ± 14.25 MPa, respectively. The control groups were significantly stronger than either oxalate group using t-tests (liquid p < 0.00001; gel p = 0.0032) or Weibull (liquid p = 0.0002; gel p = 0.0029) statistics. Oxalate groups also demonstrated more adhesive failure modes and nanoleakage. Conclusions: Under the conditions of this study, the application of oxalate with an etch-and-rinse two-step bonding system produced significantly lower long-term μTBS and enhanced nanoleakage.

AB - Objectives: Application of an acidic oxalate solution forms calcium oxalate within dentinal tubules and has been used to desensitize dentin and may also improve performance by reducing internal dentin wetness during bonding. The hypothesis tested was that oxalate restriction of dentinal fluid transudation when using an etch-and-rinse two-step adhesive will improve microtensile bond strength (μTBS) and reduce nanoleakage. Methods: Occlusal dentin of 60 human molars were bonded (Adper Single Bond Plus, 3M ESPE) while one-half of each tooth received either a liquid (SuperSeal, Phoenix Dental) or gel (BisBlock, Bisco) oxalate treatment after acid etching. The restored teeth were placed under pulpal pressure for 3 months before forming cylindrical dumbbell specimens for μTBS and failure pathway determination. Additional teeth were prepared and stored in a similar manner for transmission electron microscopy (TEM) examination of nanoleakage after tracer immersion. Results: The mean bond strength in the group with oxalate liquid and the control group was 27.06 ± 7.14 and 36.18 ± 9.07 MPa, respectively, and for the gel form of oxalate was 25.34 ± 13.09 and 33.09 ± 14.25 MPa, respectively. The control groups were significantly stronger than either oxalate group using t-tests (liquid p < 0.00001; gel p = 0.0032) or Weibull (liquid p = 0.0002; gel p = 0.0029) statistics. Oxalate groups also demonstrated more adhesive failure modes and nanoleakage. Conclusions: Under the conditions of this study, the application of oxalate with an etch-and-rinse two-step bonding system produced significantly lower long-term μTBS and enhanced nanoleakage.

KW - Dentin bond strength

KW - Dentin permeability

KW - Durability

KW - Etch-and-rinse two-step

KW - Oxalate desensitizer

UR - http://www.scopus.com/inward/record.url?scp=39249084868&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=39249084868&partnerID=8YFLogxK

U2 - 10.1016/j.jdent.2007.11.011

DO - 10.1016/j.jdent.2007.11.011

M3 - Article

VL - 36

SP - 178

EP - 185

JO - Journal of Dentistry

JF - Journal of Dentistry

SN - 0300-5712

IS - 3

ER -