Fluence loss due to Rutherford backscattering for very low energy ion implantation in silicon

Zhiyong Zhao, Che Hoo Ng, Ted Neil, Jinning Liu, JianYue Jin

Research output: Contribution to journalConference article

Abstract

Modern semiconductor device manufacturing process requires ion implantation as low as 0.5 keV. These are source/drain extension implants with high fluences. It is conceivable that the implanted ions cannot be totally retained due to surface sputtering and backscattering. So far the industry has taken a pragmatic route, i.e. implant with enough dopant so that the device reaches certain performance characteristics. Rutherford binary collision model says the stopping power cross-section is inversely proportional to the square of ions energy. This would suggest that the fluence loss from backscattering can be severe when the implant energy is very low. This work is our attempt to verify the theory's validity with such implants. In this work we experiment with boron ions of 250 eV to 5 keV and arsenic ions of 500 eV to 10 keV. With each energy the incident angle of ions to silicon wafers is changed from 0° to 30° and to 60°. A low fluence of 5 × 1013/cm2 is used for all the wafers in hope that backscattering effect can be studied without much influence from surface sputtering. Secondary ion mass spectrometry (SIMS) is used to probe for the retained fluence with each implant condition. This paper discusses the retained fluence as a function of species, energy and incident angle of ultra-low energy ions into silicon surface. It is observed that the fluence loss increases at larger tilt angles and the fluence loss due to scattering does not follow the energy dependence as depicted by the conventional Rutherford backscattering theory. At ultra-low energies the surface conditions and surface deposition mechanisms become more important and may compete with the scattering and sputtering processes. We also discuss the difficulties in dealing with such ultra-low energy implants such as the lack of established stopping power models, the issues with ion implantation and SIMS artifacts.

Original languageEnglish (US)
Pages (from-to)804-809
Number of pages6
JournalNuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms
Volume219-220
Issue number1-4
DOIs
StatePublished - Jun 1 2004
EventProceedings of the Sixteenth International Conference on Ion - Albuquerque, NM., United States
Duration: Jun 29 2003Jul 4 2003

Fingerprint

Rutherford backscattering spectroscopy
Ion implantation
ion implantation
backscattering
fluence
Silicon
Ions
silicon
Backscattering
Sputtering
Secondary ion mass spectrometry
ions
energy
sputtering
stopping power
Scattering
secondary ion mass spectrometry
wafers
Semiconductor devices
Arsenic

ASJC Scopus subject areas

  • Nuclear and High Energy Physics
  • Instrumentation

Cite this

Fluence loss due to Rutherford backscattering for very low energy ion implantation in silicon. / Zhao, Zhiyong; Ng, Che Hoo; Neil, Ted; Liu, Jinning; Jin, JianYue.

In: Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, Vol. 219-220, No. 1-4, 01.06.2004, p. 804-809.

Research output: Contribution to journalConference article

@article{5988ef0037984f5fadc2dd006ecbd45d,
title = "Fluence loss due to Rutherford backscattering for very low energy ion implantation in silicon",
abstract = "Modern semiconductor device manufacturing process requires ion implantation as low as 0.5 keV. These are source/drain extension implants with high fluences. It is conceivable that the implanted ions cannot be totally retained due to surface sputtering and backscattering. So far the industry has taken a pragmatic route, i.e. implant with enough dopant so that the device reaches certain performance characteristics. Rutherford binary collision model says the stopping power cross-section is inversely proportional to the square of ions energy. This would suggest that the fluence loss from backscattering can be severe when the implant energy is very low. This work is our attempt to verify the theory's validity with such implants. In this work we experiment with boron ions of 250 eV to 5 keV and arsenic ions of 500 eV to 10 keV. With each energy the incident angle of ions to silicon wafers is changed from 0° to 30° and to 60°. A low fluence of 5 × 1013/cm2 is used for all the wafers in hope that backscattering effect can be studied without much influence from surface sputtering. Secondary ion mass spectrometry (SIMS) is used to probe for the retained fluence with each implant condition. This paper discusses the retained fluence as a function of species, energy and incident angle of ultra-low energy ions into silicon surface. It is observed that the fluence loss increases at larger tilt angles and the fluence loss due to scattering does not follow the energy dependence as depicted by the conventional Rutherford backscattering theory. At ultra-low energies the surface conditions and surface deposition mechanisms become more important and may compete with the scattering and sputtering processes. We also discuss the difficulties in dealing with such ultra-low energy implants such as the lack of established stopping power models, the issues with ion implantation and SIMS artifacts.",
author = "Zhiyong Zhao and Ng, {Che Hoo} and Ted Neil and Jinning Liu and JianYue Jin",
year = "2004",
month = "6",
day = "1",
doi = "10.1016/j.nimb.2004.01.167",
language = "English (US)",
volume = "219-220",
pages = "804--809",
journal = "Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms",
issn = "0168-583X",
publisher = "Elsevier",
number = "1-4",

}

TY - JOUR

T1 - Fluence loss due to Rutherford backscattering for very low energy ion implantation in silicon

AU - Zhao, Zhiyong

AU - Ng, Che Hoo

AU - Neil, Ted

AU - Liu, Jinning

AU - Jin, JianYue

PY - 2004/6/1

Y1 - 2004/6/1

N2 - Modern semiconductor device manufacturing process requires ion implantation as low as 0.5 keV. These are source/drain extension implants with high fluences. It is conceivable that the implanted ions cannot be totally retained due to surface sputtering and backscattering. So far the industry has taken a pragmatic route, i.e. implant with enough dopant so that the device reaches certain performance characteristics. Rutherford binary collision model says the stopping power cross-section is inversely proportional to the square of ions energy. This would suggest that the fluence loss from backscattering can be severe when the implant energy is very low. This work is our attempt to verify the theory's validity with such implants. In this work we experiment with boron ions of 250 eV to 5 keV and arsenic ions of 500 eV to 10 keV. With each energy the incident angle of ions to silicon wafers is changed from 0° to 30° and to 60°. A low fluence of 5 × 1013/cm2 is used for all the wafers in hope that backscattering effect can be studied without much influence from surface sputtering. Secondary ion mass spectrometry (SIMS) is used to probe for the retained fluence with each implant condition. This paper discusses the retained fluence as a function of species, energy and incident angle of ultra-low energy ions into silicon surface. It is observed that the fluence loss increases at larger tilt angles and the fluence loss due to scattering does not follow the energy dependence as depicted by the conventional Rutherford backscattering theory. At ultra-low energies the surface conditions and surface deposition mechanisms become more important and may compete with the scattering and sputtering processes. We also discuss the difficulties in dealing with such ultra-low energy implants such as the lack of established stopping power models, the issues with ion implantation and SIMS artifacts.

AB - Modern semiconductor device manufacturing process requires ion implantation as low as 0.5 keV. These are source/drain extension implants with high fluences. It is conceivable that the implanted ions cannot be totally retained due to surface sputtering and backscattering. So far the industry has taken a pragmatic route, i.e. implant with enough dopant so that the device reaches certain performance characteristics. Rutherford binary collision model says the stopping power cross-section is inversely proportional to the square of ions energy. This would suggest that the fluence loss from backscattering can be severe when the implant energy is very low. This work is our attempt to verify the theory's validity with such implants. In this work we experiment with boron ions of 250 eV to 5 keV and arsenic ions of 500 eV to 10 keV. With each energy the incident angle of ions to silicon wafers is changed from 0° to 30° and to 60°. A low fluence of 5 × 1013/cm2 is used for all the wafers in hope that backscattering effect can be studied without much influence from surface sputtering. Secondary ion mass spectrometry (SIMS) is used to probe for the retained fluence with each implant condition. This paper discusses the retained fluence as a function of species, energy and incident angle of ultra-low energy ions into silicon surface. It is observed that the fluence loss increases at larger tilt angles and the fluence loss due to scattering does not follow the energy dependence as depicted by the conventional Rutherford backscattering theory. At ultra-low energies the surface conditions and surface deposition mechanisms become more important and may compete with the scattering and sputtering processes. We also discuss the difficulties in dealing with such ultra-low energy implants such as the lack of established stopping power models, the issues with ion implantation and SIMS artifacts.

UR - http://www.scopus.com/inward/record.url?scp=2342612817&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=2342612817&partnerID=8YFLogxK

U2 - 10.1016/j.nimb.2004.01.167

DO - 10.1016/j.nimb.2004.01.167

M3 - Conference article

AN - SCOPUS:2342612817

VL - 219-220

SP - 804

EP - 809

JO - Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

JF - Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

SN - 0168-583X

IS - 1-4

ER -