Measurement of microstrains across loaded resin-dentin interfaces using microscopic moiré interferometry

Judy D. Wood, Paul Sobolewski, Varun Thakur, Dwayne Arola, Ahmed Nazari, Franklin Chi Meng Tay, David Henry Pashley

Research output: Contribution to journalArticle

25 Citations (Scopus)

Abstract

Little is known about the mechanical behavior of resin-dentin interfaces during loading. The presence of relatively compliant hybrid and adhesive layers between stiffer dentin and resin composite should deform more during compressive loading. Objective: The objective of this study was to measure changes in microstrain across bonded dentin interfaces in real time using a recently developed microscope moiré interferometer. Method: This system used a miniature moiré interferometer, using two CCD cameras for simultaneous recording of longitudinal and transverse deformation fields, a piezotransducer for fringe shifting and use of a microscope objective with magnification up to 600×. Small beams (1 mm × 2 mm × 6 mm) of moist resin-bonded dentin covered with cross-lined diffraction grating replica were placed in a miniature compression tester to allow controlled loading from 2 to 37 N while imaging the interference fringe patterns. Results: Resin-dentin interfaces created by bonding dentin with Single Bond/Z100, under compressive loading, exhibited comparatively large strains across the adhesive-hybrid interface. When the wrapped phase maps were unwrapped to permit conversion of fringe order to displacements, the 2-D profiles of strain fields revealed non-uniform strains across the adhesive interface. In the adhesive/hybrid layer zone, the negative strain was larger (i.e. -6000 με) than that seen in the adjacent resin composite or underlying mineralized dentin. The changes were elastic because they disappeared when the load was removed. Significance: Microscopic moiré interferometry can be very useful in revealing real-time strain across bonded interfaces under load.

Original languageEnglish (US)
Pages (from-to)859-866
Number of pages8
JournalDental Materials
Volume24
Issue number7
DOIs
StatePublished - Jul 1 2008

Fingerprint

Interference Microscopy
Dentin
Interferometry
Resins
Adhesives
Composite Resins
Interferometers
Microscopes
Diffraction gratings
Composite materials
CCD cameras
Loads (forces)
Compaction
Imaging techniques

Keywords

  • Composite
  • Compression
  • Dentin
  • Dentin bonding agent
  • Mechanical properties
  • Moiré interferometry

ASJC Scopus subject areas

  • Materials Science(all)
  • Dentistry(all)
  • Mechanics of Materials

Cite this

Measurement of microstrains across loaded resin-dentin interfaces using microscopic moiré interferometry. / Wood, Judy D.; Sobolewski, Paul; Thakur, Varun; Arola, Dwayne; Nazari, Ahmed; Tay, Franklin Chi Meng; Pashley, David Henry.

In: Dental Materials, Vol. 24, No. 7, 01.07.2008, p. 859-866.

Research output: Contribution to journalArticle

Wood, Judy D. ; Sobolewski, Paul ; Thakur, Varun ; Arola, Dwayne ; Nazari, Ahmed ; Tay, Franklin Chi Meng ; Pashley, David Henry. / Measurement of microstrains across loaded resin-dentin interfaces using microscopic moiré interferometry. In: Dental Materials. 2008 ; Vol. 24, No. 7. pp. 859-866.
@article{0d230b32d008454cb3ae2edf913f9294,
title = "Measurement of microstrains across loaded resin-dentin interfaces using microscopic moir{\'e} interferometry",
abstract = "Little is known about the mechanical behavior of resin-dentin interfaces during loading. The presence of relatively compliant hybrid and adhesive layers between stiffer dentin and resin composite should deform more during compressive loading. Objective: The objective of this study was to measure changes in microstrain across bonded dentin interfaces in real time using a recently developed microscope moir{\'e} interferometer. Method: This system used a miniature moir{\'e} interferometer, using two CCD cameras for simultaneous recording of longitudinal and transverse deformation fields, a piezotransducer for fringe shifting and use of a microscope objective with magnification up to 600×. Small beams (1 mm × 2 mm × 6 mm) of moist resin-bonded dentin covered with cross-lined diffraction grating replica were placed in a miniature compression tester to allow controlled loading from 2 to 37 N while imaging the interference fringe patterns. Results: Resin-dentin interfaces created by bonding dentin with Single Bond/Z100, under compressive loading, exhibited comparatively large strains across the adhesive-hybrid interface. When the wrapped phase maps were unwrapped to permit conversion of fringe order to displacements, the 2-D profiles of strain fields revealed non-uniform strains across the adhesive interface. In the adhesive/hybrid layer zone, the negative strain was larger (i.e. -6000 με) than that seen in the adjacent resin composite or underlying mineralized dentin. The changes were elastic because they disappeared when the load was removed. Significance: Microscopic moir{\'e} interferometry can be very useful in revealing real-time strain across bonded interfaces under load.",
keywords = "Composite, Compression, Dentin, Dentin bonding agent, Mechanical properties, Moir{\'e} interferometry",
author = "Wood, {Judy D.} and Paul Sobolewski and Varun Thakur and Dwayne Arola and Ahmed Nazari and Tay, {Franklin Chi Meng} and Pashley, {David Henry}",
year = "2008",
month = "7",
day = "1",
doi = "10.1016/j.dental.2007.10.005",
language = "English (US)",
volume = "24",
pages = "859--866",
journal = "Dental Materials",
issn = "0109-5641",
publisher = "Elsevier Science",
number = "7",

}

TY - JOUR

T1 - Measurement of microstrains across loaded resin-dentin interfaces using microscopic moiré interferometry

AU - Wood, Judy D.

AU - Sobolewski, Paul

AU - Thakur, Varun

AU - Arola, Dwayne

AU - Nazari, Ahmed

AU - Tay, Franklin Chi Meng

AU - Pashley, David Henry

PY - 2008/7/1

Y1 - 2008/7/1

N2 - Little is known about the mechanical behavior of resin-dentin interfaces during loading. The presence of relatively compliant hybrid and adhesive layers between stiffer dentin and resin composite should deform more during compressive loading. Objective: The objective of this study was to measure changes in microstrain across bonded dentin interfaces in real time using a recently developed microscope moiré interferometer. Method: This system used a miniature moiré interferometer, using two CCD cameras for simultaneous recording of longitudinal and transverse deformation fields, a piezotransducer for fringe shifting and use of a microscope objective with magnification up to 600×. Small beams (1 mm × 2 mm × 6 mm) of moist resin-bonded dentin covered with cross-lined diffraction grating replica were placed in a miniature compression tester to allow controlled loading from 2 to 37 N while imaging the interference fringe patterns. Results: Resin-dentin interfaces created by bonding dentin with Single Bond/Z100, under compressive loading, exhibited comparatively large strains across the adhesive-hybrid interface. When the wrapped phase maps were unwrapped to permit conversion of fringe order to displacements, the 2-D profiles of strain fields revealed non-uniform strains across the adhesive interface. In the adhesive/hybrid layer zone, the negative strain was larger (i.e. -6000 με) than that seen in the adjacent resin composite or underlying mineralized dentin. The changes were elastic because they disappeared when the load was removed. Significance: Microscopic moiré interferometry can be very useful in revealing real-time strain across bonded interfaces under load.

AB - Little is known about the mechanical behavior of resin-dentin interfaces during loading. The presence of relatively compliant hybrid and adhesive layers between stiffer dentin and resin composite should deform more during compressive loading. Objective: The objective of this study was to measure changes in microstrain across bonded dentin interfaces in real time using a recently developed microscope moiré interferometer. Method: This system used a miniature moiré interferometer, using two CCD cameras for simultaneous recording of longitudinal and transverse deformation fields, a piezotransducer for fringe shifting and use of a microscope objective with magnification up to 600×. Small beams (1 mm × 2 mm × 6 mm) of moist resin-bonded dentin covered with cross-lined diffraction grating replica were placed in a miniature compression tester to allow controlled loading from 2 to 37 N while imaging the interference fringe patterns. Results: Resin-dentin interfaces created by bonding dentin with Single Bond/Z100, under compressive loading, exhibited comparatively large strains across the adhesive-hybrid interface. When the wrapped phase maps were unwrapped to permit conversion of fringe order to displacements, the 2-D profiles of strain fields revealed non-uniform strains across the adhesive interface. In the adhesive/hybrid layer zone, the negative strain was larger (i.e. -6000 με) than that seen in the adjacent resin composite or underlying mineralized dentin. The changes were elastic because they disappeared when the load was removed. Significance: Microscopic moiré interferometry can be very useful in revealing real-time strain across bonded interfaces under load.

KW - Composite

KW - Compression

KW - Dentin

KW - Dentin bonding agent

KW - Mechanical properties

KW - Moiré interferometry

UR - http://www.scopus.com/inward/record.url?scp=43549120974&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=43549120974&partnerID=8YFLogxK

U2 - 10.1016/j.dental.2007.10.005

DO - 10.1016/j.dental.2007.10.005

M3 - Article

VL - 24

SP - 859

EP - 866

JO - Dental Materials

JF - Dental Materials

SN - 0109-5641

IS - 7

ER -