Polymerization kinetics of dental adhesives cured with LED: Correlation between extent of conversion and permeability

Lorenzo Breschi, Milena Cadenaro, Francesca Antoniolli, Salvatore Sauro, Matteo Biasotto, Carlo Prati, Franklin Chi Meng Tay, Roberto Di Lenarda

Research output: Contribution to journalArticle

54 Citations (Scopus)

Abstract

Objectives: The aim of this study was to analyze the polymerization kinetics of different adhesive films in relation to their permeability after exposure to different LED curing units. Methods: One adhesive from each class was analyzed: a three-step etch-and-rinse (OptiBond FL; Sybron-Kerr), a two-step etch-and-rinse (One-Step, Bisco), a two-step self-etch (Clearfil Protect Bond, Kuraray) and a one-step self-etch adhesive (Xeno III; Dentsply DeTrey). Adhesive films were prepared and cured with SmartLite IQ (Dentsply) or L.E.Demetron I (Demetron Kerr) up to complete curing. Polymerization kinetic curves of the tested adhesives were obtained with differential scanning calorimetry (DSC). In particular, total reaction time and extent of polymerization (Ep) at 20, 40 or 60 s were compared. Permeability of the adhesive films was evaluated on flat dentin surfaces of human extracted teeth connected to a permeability device and statistically analyzed. Results: Total reaction time differed among the adhesives tested: OptiBond FL < Clearfil Protect Bond < One-Step < Xeno III with both curing units (p < 0.05). At 20 s OptiBond FL showed the highest Ep, while the lowest values were obtained with One-Step and Xeno III (p < 0.05). Ep increased when curing time was prolonged (40 and 60 s) for all adhesives tested (p < 0.05), however, on simplified adhesives, incomplete polymerization took place even after prolonged exposure intervals. An inverse correlation was found between Ep of the adhesives and their permeability using LED curing units. Significance: This study supports the hypothesis that, longer curing times than those recommended by the respective manufacturer decrease permeability of the bonded interfaces.

Original languageEnglish (US)
Pages (from-to)1066-1072
Number of pages7
JournalDental Materials
Volume23
Issue number9
DOIs
StatePublished - Sep 1 2007

Fingerprint

Dental Cements
Polymerization
Adhesives
Light emitting diodes
Permeability
Kinetics
Curing
Differential Scanning Calorimetry
Dentin
Differential scanning calorimetry
Tooth

Keywords

  • Dentin
  • Dentin adhesives
  • Extent of polymerization
  • LED curing units
  • Permeability

ASJC Scopus subject areas

  • Dentistry(all)

Cite this

Breschi, L., Cadenaro, M., Antoniolli, F., Sauro, S., Biasotto, M., Prati, C., ... Di Lenarda, R. (2007). Polymerization kinetics of dental adhesives cured with LED: Correlation between extent of conversion and permeability. Dental Materials, 23(9), 1066-1072. https://doi.org/10.1016/j.dental.2006.06.040

Polymerization kinetics of dental adhesives cured with LED : Correlation between extent of conversion and permeability. / Breschi, Lorenzo; Cadenaro, Milena; Antoniolli, Francesca; Sauro, Salvatore; Biasotto, Matteo; Prati, Carlo; Tay, Franklin Chi Meng; Di Lenarda, Roberto.

In: Dental Materials, Vol. 23, No. 9, 01.09.2007, p. 1066-1072.

Research output: Contribution to journalArticle

Breschi, L, Cadenaro, M, Antoniolli, F, Sauro, S, Biasotto, M, Prati, C, Tay, FCM & Di Lenarda, R 2007, 'Polymerization kinetics of dental adhesives cured with LED: Correlation between extent of conversion and permeability', Dental Materials, vol. 23, no. 9, pp. 1066-1072. https://doi.org/10.1016/j.dental.2006.06.040
Breschi, Lorenzo ; Cadenaro, Milena ; Antoniolli, Francesca ; Sauro, Salvatore ; Biasotto, Matteo ; Prati, Carlo ; Tay, Franklin Chi Meng ; Di Lenarda, Roberto. / Polymerization kinetics of dental adhesives cured with LED : Correlation between extent of conversion and permeability. In: Dental Materials. 2007 ; Vol. 23, No. 9. pp. 1066-1072.
@article{6d2face7415546f0b76539422456a485,
title = "Polymerization kinetics of dental adhesives cured with LED: Correlation between extent of conversion and permeability",
abstract = "Objectives: The aim of this study was to analyze the polymerization kinetics of different adhesive films in relation to their permeability after exposure to different LED curing units. Methods: One adhesive from each class was analyzed: a three-step etch-and-rinse (OptiBond FL; Sybron-Kerr), a two-step etch-and-rinse (One-Step, Bisco), a two-step self-etch (Clearfil Protect Bond, Kuraray) and a one-step self-etch adhesive (Xeno III; Dentsply DeTrey). Adhesive films were prepared and cured with SmartLite IQ (Dentsply) or L.E.Demetron I (Demetron Kerr) up to complete curing. Polymerization kinetic curves of the tested adhesives were obtained with differential scanning calorimetry (DSC). In particular, total reaction time and extent of polymerization (Ep) at 20, 40 or 60 s were compared. Permeability of the adhesive films was evaluated on flat dentin surfaces of human extracted teeth connected to a permeability device and statistically analyzed. Results: Total reaction time differed among the adhesives tested: OptiBond FL < Clearfil Protect Bond < One-Step < Xeno III with both curing units (p < 0.05). At 20 s OptiBond FL showed the highest Ep, while the lowest values were obtained with One-Step and Xeno III (p < 0.05). Ep increased when curing time was prolonged (40 and 60 s) for all adhesives tested (p < 0.05), however, on simplified adhesives, incomplete polymerization took place even after prolonged exposure intervals. An inverse correlation was found between Ep of the adhesives and their permeability using LED curing units. Significance: This study supports the hypothesis that, longer curing times than those recommended by the respective manufacturer decrease permeability of the bonded interfaces.",
keywords = "Dentin, Dentin adhesives, Extent of polymerization, LED curing units, Permeability",
author = "Lorenzo Breschi and Milena Cadenaro and Francesca Antoniolli and Salvatore Sauro and Matteo Biasotto and Carlo Prati and Tay, {Franklin Chi Meng} and {Di Lenarda}, Roberto",
year = "2007",
month = "9",
day = "1",
doi = "10.1016/j.dental.2006.06.040",
language = "English (US)",
volume = "23",
pages = "1066--1072",
journal = "Dental Materials",
issn = "0109-5641",
publisher = "Elsevier Science",
number = "9",

}

TY - JOUR

T1 - Polymerization kinetics of dental adhesives cured with LED

T2 - Correlation between extent of conversion and permeability

AU - Breschi, Lorenzo

AU - Cadenaro, Milena

AU - Antoniolli, Francesca

AU - Sauro, Salvatore

AU - Biasotto, Matteo

AU - Prati, Carlo

AU - Tay, Franklin Chi Meng

AU - Di Lenarda, Roberto

PY - 2007/9/1

Y1 - 2007/9/1

N2 - Objectives: The aim of this study was to analyze the polymerization kinetics of different adhesive films in relation to their permeability after exposure to different LED curing units. Methods: One adhesive from each class was analyzed: a three-step etch-and-rinse (OptiBond FL; Sybron-Kerr), a two-step etch-and-rinse (One-Step, Bisco), a two-step self-etch (Clearfil Protect Bond, Kuraray) and a one-step self-etch adhesive (Xeno III; Dentsply DeTrey). Adhesive films were prepared and cured with SmartLite IQ (Dentsply) or L.E.Demetron I (Demetron Kerr) up to complete curing. Polymerization kinetic curves of the tested adhesives were obtained with differential scanning calorimetry (DSC). In particular, total reaction time and extent of polymerization (Ep) at 20, 40 or 60 s were compared. Permeability of the adhesive films was evaluated on flat dentin surfaces of human extracted teeth connected to a permeability device and statistically analyzed. Results: Total reaction time differed among the adhesives tested: OptiBond FL < Clearfil Protect Bond < One-Step < Xeno III with both curing units (p < 0.05). At 20 s OptiBond FL showed the highest Ep, while the lowest values were obtained with One-Step and Xeno III (p < 0.05). Ep increased when curing time was prolonged (40 and 60 s) for all adhesives tested (p < 0.05), however, on simplified adhesives, incomplete polymerization took place even after prolonged exposure intervals. An inverse correlation was found between Ep of the adhesives and their permeability using LED curing units. Significance: This study supports the hypothesis that, longer curing times than those recommended by the respective manufacturer decrease permeability of the bonded interfaces.

AB - Objectives: The aim of this study was to analyze the polymerization kinetics of different adhesive films in relation to their permeability after exposure to different LED curing units. Methods: One adhesive from each class was analyzed: a three-step etch-and-rinse (OptiBond FL; Sybron-Kerr), a two-step etch-and-rinse (One-Step, Bisco), a two-step self-etch (Clearfil Protect Bond, Kuraray) and a one-step self-etch adhesive (Xeno III; Dentsply DeTrey). Adhesive films were prepared and cured with SmartLite IQ (Dentsply) or L.E.Demetron I (Demetron Kerr) up to complete curing. Polymerization kinetic curves of the tested adhesives were obtained with differential scanning calorimetry (DSC). In particular, total reaction time and extent of polymerization (Ep) at 20, 40 or 60 s were compared. Permeability of the adhesive films was evaluated on flat dentin surfaces of human extracted teeth connected to a permeability device and statistically analyzed. Results: Total reaction time differed among the adhesives tested: OptiBond FL < Clearfil Protect Bond < One-Step < Xeno III with both curing units (p < 0.05). At 20 s OptiBond FL showed the highest Ep, while the lowest values were obtained with One-Step and Xeno III (p < 0.05). Ep increased when curing time was prolonged (40 and 60 s) for all adhesives tested (p < 0.05), however, on simplified adhesives, incomplete polymerization took place even after prolonged exposure intervals. An inverse correlation was found between Ep of the adhesives and their permeability using LED curing units. Significance: This study supports the hypothesis that, longer curing times than those recommended by the respective manufacturer decrease permeability of the bonded interfaces.

KW - Dentin

KW - Dentin adhesives

KW - Extent of polymerization

KW - LED curing units

KW - Permeability

UR - http://www.scopus.com/inward/record.url?scp=34547122878&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34547122878&partnerID=8YFLogxK

U2 - 10.1016/j.dental.2006.06.040

DO - 10.1016/j.dental.2006.06.040

M3 - Article

C2 - 17109951

AN - SCOPUS:34547122878

VL - 23

SP - 1066

EP - 1072

JO - Dental Materials

JF - Dental Materials

SN - 0109-5641

IS - 9

ER -