The adhesion between fibre posts and composite resin cores: The evaluation of microtensile bond strength following various surface chemical treatments to posts

M. Vano, C. Goracci, F. Monticelli, F. Tognini, M. Gabriele, Franklin Chi Meng Tay, M. Ferrari

Research output: Contribution to journalArticle

101 Citations (Scopus)

Abstract

Aim: To evaluate the influence of various surface treatments to fibre posts on the microtensile bond strength with different composite resins. Methodology: A total of 110 fibre posts were randomly divided into five groups, according to the surface pre-treatment performed. Group 1: immersion in 24% H 2O2 for 10 min and silanization for 60 s; group 2: immersion in 10% H2O2 for 20 min and silanization for 60 s; group 3: immersion in 4% hydrofluoric acid gel for 60 s and silanization for 60 s; group 4: silanization of the post surface for 60 s and application of the bonding agent G-Bond; group 5: silanization of the post surface for 60 s (control group). After treatment, two posts were randomly selected from each group to evaluate the morphological aspect of the post surface with scanning electron microscopy. The remaining posts in each group were divided into five subgroups of five posts each, which differed in the type of composite resin used for the core build-up. Post-core strength were calculated and the differences among experimental groups were analysed with two-way anova and the Tukey test (α = 0.05). Results: The post-core strengths achieved in groups 1 and 2 were significantly higher (P < 0.05), than those of groups 3, 4 and 5. The post-core strength in the control group was significantly lower (P < 0.05) than all other groups. Conclusions: Hydrogen peroxide and hydrofluoric acid both modified the surface morphology of fibre posts and with silane, significantly enhanced the interfacial strength between them and core materials.

Original languageEnglish (US)
Pages (from-to)31-39
Number of pages9
JournalInternational Endodontic Journal
Volume39
Issue number1
DOIs
StatePublished - Jan 1 2006

Fingerprint

Composite Resins
Immersion
Hydrofluoric Acid
Silanes
Control Groups
Electron Scanning Microscopy
Hydrogen Peroxide
Gels

Keywords

  • Fibre posts
  • Hydrofluoric acid gel
  • Hydrogen peroxide
  • Microtensile bond strength
  • Surface treatment

ASJC Scopus subject areas

  • Dentistry(all)

Cite this

The adhesion between fibre posts and composite resin cores : The evaluation of microtensile bond strength following various surface chemical treatments to posts. / Vano, M.; Goracci, C.; Monticelli, F.; Tognini, F.; Gabriele, M.; Tay, Franklin Chi Meng; Ferrari, M.

In: International Endodontic Journal, Vol. 39, No. 1, 01.01.2006, p. 31-39.

Research output: Contribution to journalArticle

@article{2edcd446f48f4286a205daa2debec808,
title = "The adhesion between fibre posts and composite resin cores: The evaluation of microtensile bond strength following various surface chemical treatments to posts",
abstract = "Aim: To evaluate the influence of various surface treatments to fibre posts on the microtensile bond strength with different composite resins. Methodology: A total of 110 fibre posts were randomly divided into five groups, according to the surface pre-treatment performed. Group 1: immersion in 24{\%} H 2O2 for 10 min and silanization for 60 s; group 2: immersion in 10{\%} H2O2 for 20 min and silanization for 60 s; group 3: immersion in 4{\%} hydrofluoric acid gel for 60 s and silanization for 60 s; group 4: silanization of the post surface for 60 s and application of the bonding agent G-Bond; group 5: silanization of the post surface for 60 s (control group). After treatment, two posts were randomly selected from each group to evaluate the morphological aspect of the post surface with scanning electron microscopy. The remaining posts in each group were divided into five subgroups of five posts each, which differed in the type of composite resin used for the core build-up. Post-core strength were calculated and the differences among experimental groups were analysed with two-way anova and the Tukey test (α = 0.05). Results: The post-core strengths achieved in groups 1 and 2 were significantly higher (P < 0.05), than those of groups 3, 4 and 5. The post-core strength in the control group was significantly lower (P < 0.05) than all other groups. Conclusions: Hydrogen peroxide and hydrofluoric acid both modified the surface morphology of fibre posts and with silane, significantly enhanced the interfacial strength between them and core materials.",
keywords = "Fibre posts, Hydrofluoric acid gel, Hydrogen peroxide, Microtensile bond strength, Surface treatment",
author = "M. Vano and C. Goracci and F. Monticelli and F. Tognini and M. Gabriele and Tay, {Franklin Chi Meng} and M. Ferrari",
year = "2006",
month = "1",
day = "1",
doi = "10.1111/j.1365-2591.2005.01044.x",
language = "English (US)",
volume = "39",
pages = "31--39",
journal = "International Endodontic Journal",
issn = "0143-2885",
publisher = "Wiley-Blackwell",
number = "1",

}

TY - JOUR

T1 - The adhesion between fibre posts and composite resin cores

T2 - The evaluation of microtensile bond strength following various surface chemical treatments to posts

AU - Vano, M.

AU - Goracci, C.

AU - Monticelli, F.

AU - Tognini, F.

AU - Gabriele, M.

AU - Tay, Franklin Chi Meng

AU - Ferrari, M.

PY - 2006/1/1

Y1 - 2006/1/1

N2 - Aim: To evaluate the influence of various surface treatments to fibre posts on the microtensile bond strength with different composite resins. Methodology: A total of 110 fibre posts were randomly divided into five groups, according to the surface pre-treatment performed. Group 1: immersion in 24% H 2O2 for 10 min and silanization for 60 s; group 2: immersion in 10% H2O2 for 20 min and silanization for 60 s; group 3: immersion in 4% hydrofluoric acid gel for 60 s and silanization for 60 s; group 4: silanization of the post surface for 60 s and application of the bonding agent G-Bond; group 5: silanization of the post surface for 60 s (control group). After treatment, two posts were randomly selected from each group to evaluate the morphological aspect of the post surface with scanning electron microscopy. The remaining posts in each group were divided into five subgroups of five posts each, which differed in the type of composite resin used for the core build-up. Post-core strength were calculated and the differences among experimental groups were analysed with two-way anova and the Tukey test (α = 0.05). Results: The post-core strengths achieved in groups 1 and 2 were significantly higher (P < 0.05), than those of groups 3, 4 and 5. The post-core strength in the control group was significantly lower (P < 0.05) than all other groups. Conclusions: Hydrogen peroxide and hydrofluoric acid both modified the surface morphology of fibre posts and with silane, significantly enhanced the interfacial strength between them and core materials.

AB - Aim: To evaluate the influence of various surface treatments to fibre posts on the microtensile bond strength with different composite resins. Methodology: A total of 110 fibre posts were randomly divided into five groups, according to the surface pre-treatment performed. Group 1: immersion in 24% H 2O2 for 10 min and silanization for 60 s; group 2: immersion in 10% H2O2 for 20 min and silanization for 60 s; group 3: immersion in 4% hydrofluoric acid gel for 60 s and silanization for 60 s; group 4: silanization of the post surface for 60 s and application of the bonding agent G-Bond; group 5: silanization of the post surface for 60 s (control group). After treatment, two posts were randomly selected from each group to evaluate the morphological aspect of the post surface with scanning electron microscopy. The remaining posts in each group were divided into five subgroups of five posts each, which differed in the type of composite resin used for the core build-up. Post-core strength were calculated and the differences among experimental groups were analysed with two-way anova and the Tukey test (α = 0.05). Results: The post-core strengths achieved in groups 1 and 2 were significantly higher (P < 0.05), than those of groups 3, 4 and 5. The post-core strength in the control group was significantly lower (P < 0.05) than all other groups. Conclusions: Hydrogen peroxide and hydrofluoric acid both modified the surface morphology of fibre posts and with silane, significantly enhanced the interfacial strength between them and core materials.

KW - Fibre posts

KW - Hydrofluoric acid gel

KW - Hydrogen peroxide

KW - Microtensile bond strength

KW - Surface treatment

UR - http://www.scopus.com/inward/record.url?scp=33644892822&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33644892822&partnerID=8YFLogxK

U2 - 10.1111/j.1365-2591.2005.01044.x

DO - 10.1111/j.1365-2591.2005.01044.x

M3 - Article

C2 - 16409326

AN - SCOPUS:33644892822

VL - 39

SP - 31

EP - 39

JO - International Endodontic Journal

JF - International Endodontic Journal

SN - 0143-2885

IS - 1

ER -