The effect of different air-polishing powders on dentin bonding

Roland Frankenberger, Ulrich Lohbauer, Franklin R. Tay, Michael Taschner, Sergej A. Nikolaenko

Research output: Contribution to journalArticle

18 Citations (Scopus)

Abstract

Purpose: Air-polishing is routinely used for professional tooth cleaning. Therefore, the aim of this in vitro study was to evaluate the influence of different air-polishing powders on dentin bonding. Materials and Methods: Dentin bond strengths of a resin composite (Clearfil AP-X) bonded with different classes of adhesives (4-step etch-and-rinse: Syntac; 3-step etch-and-rinse: OptiBond FL; 2-step etch-and-rinse: Single Bond Plus; 2-step self-etching: AdheSE, Clearfil SE Bond, Clearfil Protect Bond, One Coat Self-Etch Bond; all-in-one/mix: Xeno III; all-in-one/no mix: Clearfil S3 Bond, G-Bond) were measured on flattened dentin surfaces. In test groups, specimens were air polished with Prophypearls (calcium carbonate) or ClinPro Prophypowder (glycine) prior to bonding. Microtensile bond strengths were evaluated after 24 h of storage at 37°C in water. Surfaces and resin-dentin interfaces were observed by SEM, TEM, and CLSM. Results: Mean bond strengths varied from 18 to 73 MPa in control groups. Calcium carbonate air polishing generally caused significantly reduced dentin bond strengths (p < 0.05). TEM exhibited severe nanoleakage after calcium carbonate air polishing. Glycine did not affect dentin bonding performance of the adhesives under investigation. Conclusion: Calcium carbonate air polishing should be avoided when dentin-bonded restorations are applied. Glycine powder is an alternative.

Original languageEnglish (US)
Pages (from-to)381-389
Number of pages9
JournalJournal of Adhesive Dentistry
Volume9
Issue number4
StatePublished - Aug 23 2007

Fingerprint

Dentin
Powders
Air
Calcium Carbonate
Glycine
Adhesives
Composite Resins
Tooth
Control Groups
Water

Keywords

  • Air polishing
  • Calcium carbonate
  • Dentin bonding
  • Glycine
  • Resin composites

ASJC Scopus subject areas

  • Orthodontics
  • Oral Surgery
  • Periodontics

Cite this

Frankenberger, R., Lohbauer, U., Tay, F. R., Taschner, M., & Nikolaenko, S. A. (2007). The effect of different air-polishing powders on dentin bonding. Journal of Adhesive Dentistry, 9(4), 381-389.

The effect of different air-polishing powders on dentin bonding. / Frankenberger, Roland; Lohbauer, Ulrich; Tay, Franklin R.; Taschner, Michael; Nikolaenko, Sergej A.

In: Journal of Adhesive Dentistry, Vol. 9, No. 4, 23.08.2007, p. 381-389.

Research output: Contribution to journalArticle

Frankenberger, R, Lohbauer, U, Tay, FR, Taschner, M & Nikolaenko, SA 2007, 'The effect of different air-polishing powders on dentin bonding', Journal of Adhesive Dentistry, vol. 9, no. 4, pp. 381-389.
Frankenberger R, Lohbauer U, Tay FR, Taschner M, Nikolaenko SA. The effect of different air-polishing powders on dentin bonding. Journal of Adhesive Dentistry. 2007 Aug 23;9(4):381-389.
Frankenberger, Roland ; Lohbauer, Ulrich ; Tay, Franklin R. ; Taschner, Michael ; Nikolaenko, Sergej A. / The effect of different air-polishing powders on dentin bonding. In: Journal of Adhesive Dentistry. 2007 ; Vol. 9, No. 4. pp. 381-389.
@article{580ba8086fb841278d0e675d90262223,
title = "The effect of different air-polishing powders on dentin bonding",
abstract = "Purpose: Air-polishing is routinely used for professional tooth cleaning. Therefore, the aim of this in vitro study was to evaluate the influence of different air-polishing powders on dentin bonding. Materials and Methods: Dentin bond strengths of a resin composite (Clearfil AP-X) bonded with different classes of adhesives (4-step etch-and-rinse: Syntac; 3-step etch-and-rinse: OptiBond FL; 2-step etch-and-rinse: Single Bond Plus; 2-step self-etching: AdheSE, Clearfil SE Bond, Clearfil Protect Bond, One Coat Self-Etch Bond; all-in-one/mix: Xeno III; all-in-one/no mix: Clearfil S3 Bond, G-Bond) were measured on flattened dentin surfaces. In test groups, specimens were air polished with Prophypearls (calcium carbonate) or ClinPro Prophypowder (glycine) prior to bonding. Microtensile bond strengths were evaluated after 24 h of storage at 37°C in water. Surfaces and resin-dentin interfaces were observed by SEM, TEM, and CLSM. Results: Mean bond strengths varied from 18 to 73 MPa in control groups. Calcium carbonate air polishing generally caused significantly reduced dentin bond strengths (p < 0.05). TEM exhibited severe nanoleakage after calcium carbonate air polishing. Glycine did not affect dentin bonding performance of the adhesives under investigation. Conclusion: Calcium carbonate air polishing should be avoided when dentin-bonded restorations are applied. Glycine powder is an alternative.",
keywords = "Air polishing, Calcium carbonate, Dentin bonding, Glycine, Resin composites",
author = "Roland Frankenberger and Ulrich Lohbauer and Tay, {Franklin R.} and Michael Taschner and Nikolaenko, {Sergej A.}",
year = "2007",
month = "8",
day = "23",
language = "English (US)",
volume = "9",
pages = "381--389",
journal = "The journal of adhesive dentistry",
issn = "1461-5185",
publisher = "Quintessence Publishing Company",
number = "4",

}

TY - JOUR

T1 - The effect of different air-polishing powders on dentin bonding

AU - Frankenberger, Roland

AU - Lohbauer, Ulrich

AU - Tay, Franklin R.

AU - Taschner, Michael

AU - Nikolaenko, Sergej A.

PY - 2007/8/23

Y1 - 2007/8/23

N2 - Purpose: Air-polishing is routinely used for professional tooth cleaning. Therefore, the aim of this in vitro study was to evaluate the influence of different air-polishing powders on dentin bonding. Materials and Methods: Dentin bond strengths of a resin composite (Clearfil AP-X) bonded with different classes of adhesives (4-step etch-and-rinse: Syntac; 3-step etch-and-rinse: OptiBond FL; 2-step etch-and-rinse: Single Bond Plus; 2-step self-etching: AdheSE, Clearfil SE Bond, Clearfil Protect Bond, One Coat Self-Etch Bond; all-in-one/mix: Xeno III; all-in-one/no mix: Clearfil S3 Bond, G-Bond) were measured on flattened dentin surfaces. In test groups, specimens were air polished with Prophypearls (calcium carbonate) or ClinPro Prophypowder (glycine) prior to bonding. Microtensile bond strengths were evaluated after 24 h of storage at 37°C in water. Surfaces and resin-dentin interfaces were observed by SEM, TEM, and CLSM. Results: Mean bond strengths varied from 18 to 73 MPa in control groups. Calcium carbonate air polishing generally caused significantly reduced dentin bond strengths (p < 0.05). TEM exhibited severe nanoleakage after calcium carbonate air polishing. Glycine did not affect dentin bonding performance of the adhesives under investigation. Conclusion: Calcium carbonate air polishing should be avoided when dentin-bonded restorations are applied. Glycine powder is an alternative.

AB - Purpose: Air-polishing is routinely used for professional tooth cleaning. Therefore, the aim of this in vitro study was to evaluate the influence of different air-polishing powders on dentin bonding. Materials and Methods: Dentin bond strengths of a resin composite (Clearfil AP-X) bonded with different classes of adhesives (4-step etch-and-rinse: Syntac; 3-step etch-and-rinse: OptiBond FL; 2-step etch-and-rinse: Single Bond Plus; 2-step self-etching: AdheSE, Clearfil SE Bond, Clearfil Protect Bond, One Coat Self-Etch Bond; all-in-one/mix: Xeno III; all-in-one/no mix: Clearfil S3 Bond, G-Bond) were measured on flattened dentin surfaces. In test groups, specimens were air polished with Prophypearls (calcium carbonate) or ClinPro Prophypowder (glycine) prior to bonding. Microtensile bond strengths were evaluated after 24 h of storage at 37°C in water. Surfaces and resin-dentin interfaces were observed by SEM, TEM, and CLSM. Results: Mean bond strengths varied from 18 to 73 MPa in control groups. Calcium carbonate air polishing generally caused significantly reduced dentin bond strengths (p < 0.05). TEM exhibited severe nanoleakage after calcium carbonate air polishing. Glycine did not affect dentin bonding performance of the adhesives under investigation. Conclusion: Calcium carbonate air polishing should be avoided when dentin-bonded restorations are applied. Glycine powder is an alternative.

KW - Air polishing

KW - Calcium carbonate

KW - Dentin bonding

KW - Glycine

KW - Resin composites

UR - http://www.scopus.com/inward/record.url?scp=34547985167&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34547985167&partnerID=8YFLogxK

M3 - Article

C2 - 17847641

AN - SCOPUS:34547985167

VL - 9

SP - 381

EP - 389

JO - The journal of adhesive dentistry

JF - The journal of adhesive dentistry

SN - 1461-5185

IS - 4

ER -