Analysis of circumferential shielding as a methodto decouple radiofrequency coils for high-field MRI

Jean-Guy Belliveau, Kyle M. Gilbert, Mohamed Abou-Khousa, Ravi S. Menon

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Reducing the impact of mutual coupling in magnetic resonance imaging (MRI) radiofrequency (RF) coil transmit/receive arrays constitutes a serious design challenge. Recently, it has been shown that mutual coupling in such arrays can be significantly reduced by circumferentially shielding the individual array elements. For such a decoupling method to be optimized and readily incorporated into future array designs, comprehensive analysis of the shield's effect on overall element and array performance is required. This study is focused on methodically analyzing this decoupling method to determine the effect of shielding geometry on overall coil performance in high-field MRI. To this end, experiments on a 7-Tesla MRI system, as well as full-wave electromagnetic simulations, were performed and performance metrics, such as Q-factor, power efficiency, transmit power, signal-to-noise ratio (SNR), and specific absorption rate (SAR), were investigated for different coil/shield configurations. Differences in the geometry of a RF coil and its respective shield resulted in an increase in peak SNR of up to 40% compared to an unshielded coil. This was concurrent with a 2-4 dB reduction in the required transmit power to produce a given flip angle and a 25% reduction in peak local SAR compared to the unshielded coil. Coupling between adjacent loaded coils was strongly influenced by the coil/shield geometry and ranged from -6.5 to -22.1 dB. Based upon the analysis presented herein, example coil-array designs are provided and have been optimized for either peripheral or whole-brain imaging.

Original languageEnglish (US)
Pages (from-to)11-21
Number of pages11
JournalConcepts in Magnetic Resonance Part B: Magnetic Resonance Engineering
Volume43 B
Issue number1
DOIs
StatePublished - Feb 1 2013

Fingerprint

Magnetic resonance
Shielding
shielding
magnetic resonance
coils
Magnetic Resonance Imaging
Signal-To-Noise Ratio
Imaging techniques
Geometry
Signal to noise ratio
Electromagnetic Radiation
Neuroimaging
Imaging systems
Electromagnetic waves
Brain
decoupling
signal to noise ratios
geometry
design analysis
Experiments

Keywords

  • Decoupling
  • High-field MRI
  • Mutual coupling
  • Radiofrequency coil
  • SAR
  • Signal-to-noise ratio
  • Transmit array

ASJC Scopus subject areas

  • Radiological and Ultrasound Technology
  • Radiology Nuclear Medicine and imaging
  • Spectroscopy
  • Physical and Theoretical Chemistry

Cite this

Analysis of circumferential shielding as a methodto decouple radiofrequency coils for high-field MRI. / Belliveau, Jean-Guy; Gilbert, Kyle M.; Abou-Khousa, Mohamed; Menon, Ravi S.

In: Concepts in Magnetic Resonance Part B: Magnetic Resonance Engineering, Vol. 43 B, No. 1, 01.02.2013, p. 11-21.

Research output: Contribution to journalArticle

@article{cab82dc5cee64b8bb3e25a80acf95f77,
title = "Analysis of circumferential shielding as a methodto decouple radiofrequency coils for high-field MRI",
abstract = "Reducing the impact of mutual coupling in magnetic resonance imaging (MRI) radiofrequency (RF) coil transmit/receive arrays constitutes a serious design challenge. Recently, it has been shown that mutual coupling in such arrays can be significantly reduced by circumferentially shielding the individual array elements. For such a decoupling method to be optimized and readily incorporated into future array designs, comprehensive analysis of the shield's effect on overall element and array performance is required. This study is focused on methodically analyzing this decoupling method to determine the effect of shielding geometry on overall coil performance in high-field MRI. To this end, experiments on a 7-Tesla MRI system, as well as full-wave electromagnetic simulations, were performed and performance metrics, such as Q-factor, power efficiency, transmit power, signal-to-noise ratio (SNR), and specific absorption rate (SAR), were investigated for different coil/shield configurations. Differences in the geometry of a RF coil and its respective shield resulted in an increase in peak SNR of up to 40{\%} compared to an unshielded coil. This was concurrent with a 2-4 dB reduction in the required transmit power to produce a given flip angle and a 25{\%} reduction in peak local SAR compared to the unshielded coil. Coupling between adjacent loaded coils was strongly influenced by the coil/shield geometry and ranged from -6.5 to -22.1 dB. Based upon the analysis presented herein, example coil-array designs are provided and have been optimized for either peripheral or whole-brain imaging.",
keywords = "Decoupling, High-field MRI, Mutual coupling, Radiofrequency coil, SAR, Signal-to-noise ratio, Transmit array",
author = "Jean-Guy Belliveau and Gilbert, {Kyle M.} and Mohamed Abou-Khousa and Menon, {Ravi S.}",
year = "2013",
month = "2",
day = "1",
doi = "10.1002/cmr.b.21227",
language = "English (US)",
volume = "43 B",
pages = "11--21",
journal = "Concepts in Magnetic Resonance Part B: Magnetic Resonance Engineering",
issn = "1552-5031",
publisher = "Wiley-Liss Inc.",
number = "1",

}

TY - JOUR

T1 - Analysis of circumferential shielding as a methodto decouple radiofrequency coils for high-field MRI

AU - Belliveau, Jean-Guy

AU - Gilbert, Kyle M.

AU - Abou-Khousa, Mohamed

AU - Menon, Ravi S.

PY - 2013/2/1

Y1 - 2013/2/1

N2 - Reducing the impact of mutual coupling in magnetic resonance imaging (MRI) radiofrequency (RF) coil transmit/receive arrays constitutes a serious design challenge. Recently, it has been shown that mutual coupling in such arrays can be significantly reduced by circumferentially shielding the individual array elements. For such a decoupling method to be optimized and readily incorporated into future array designs, comprehensive analysis of the shield's effect on overall element and array performance is required. This study is focused on methodically analyzing this decoupling method to determine the effect of shielding geometry on overall coil performance in high-field MRI. To this end, experiments on a 7-Tesla MRI system, as well as full-wave electromagnetic simulations, were performed and performance metrics, such as Q-factor, power efficiency, transmit power, signal-to-noise ratio (SNR), and specific absorption rate (SAR), were investigated for different coil/shield configurations. Differences in the geometry of a RF coil and its respective shield resulted in an increase in peak SNR of up to 40% compared to an unshielded coil. This was concurrent with a 2-4 dB reduction in the required transmit power to produce a given flip angle and a 25% reduction in peak local SAR compared to the unshielded coil. Coupling between adjacent loaded coils was strongly influenced by the coil/shield geometry and ranged from -6.5 to -22.1 dB. Based upon the analysis presented herein, example coil-array designs are provided and have been optimized for either peripheral or whole-brain imaging.

AB - Reducing the impact of mutual coupling in magnetic resonance imaging (MRI) radiofrequency (RF) coil transmit/receive arrays constitutes a serious design challenge. Recently, it has been shown that mutual coupling in such arrays can be significantly reduced by circumferentially shielding the individual array elements. For such a decoupling method to be optimized and readily incorporated into future array designs, comprehensive analysis of the shield's effect on overall element and array performance is required. This study is focused on methodically analyzing this decoupling method to determine the effect of shielding geometry on overall coil performance in high-field MRI. To this end, experiments on a 7-Tesla MRI system, as well as full-wave electromagnetic simulations, were performed and performance metrics, such as Q-factor, power efficiency, transmit power, signal-to-noise ratio (SNR), and specific absorption rate (SAR), were investigated for different coil/shield configurations. Differences in the geometry of a RF coil and its respective shield resulted in an increase in peak SNR of up to 40% compared to an unshielded coil. This was concurrent with a 2-4 dB reduction in the required transmit power to produce a given flip angle and a 25% reduction in peak local SAR compared to the unshielded coil. Coupling between adjacent loaded coils was strongly influenced by the coil/shield geometry and ranged from -6.5 to -22.1 dB. Based upon the analysis presented herein, example coil-array designs are provided and have been optimized for either peripheral or whole-brain imaging.

KW - Decoupling

KW - High-field MRI

KW - Mutual coupling

KW - Radiofrequency coil

KW - SAR

KW - Signal-to-noise ratio

KW - Transmit array

UR - http://www.scopus.com/inward/record.url?scp=84874292917&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84874292917&partnerID=8YFLogxK

U2 - 10.1002/cmr.b.21227

DO - 10.1002/cmr.b.21227

M3 - Article

AN - SCOPUS:84874292917

VL - 43 B

SP - 11

EP - 21

JO - Concepts in Magnetic Resonance Part B: Magnetic Resonance Engineering

JF - Concepts in Magnetic Resonance Part B: Magnetic Resonance Engineering

SN - 1552-5031

IS - 1

ER -