TU‐C‐204B‐01: Reduce Patient Dose and Improve Image Quality in CBCT for Image Guided Radiotherapy

J. Jin, L. Ren, J. Kim, B. Movsas, I. Chetty

Research output: Contribution to journalArticle

Abstract

Introduction: We have demonstrated that cone beam CT (CBCT) image quality was substantially improved in terms of eliminating scatter related artifacts and enhancing contrast‐to‐noise ratio, using a 1D grid placed between the x‐ray source and the imaging object. The grid serves to physically reduce scatter while also enabling measurements of scatter simultaneously for post‐scan scatter correction. A full set of CBCT images can be generated from the partially‐blocked imaging data using either one‐ or dual‐rotation modes. Using one‐rotation has particularly the advantage of reducing imaging dose by a factor of two in comparison to conventional CBCT. The tradeoff is that longitudinal resolution is degraded. This study evaluates the feasibility of using CBCT images from the single‐rotation mode for image‐guided radiotherapy (IGRT). Methods and material: A lead grid of approximately 1‐mm septa width and interspace was placed at a source‐to‐grid distance of approximately 30‐cm in a Varian Trilogy CBCT system for the single‐rotation mode. An anthropomorphic pelvis phantom was used for the test. Various steps in imaging processing were performed for each projection, including measuring the scatter distribution, performing scatter correction, deriving imaging information in the grid penumbral regions by dividing the projection with a blank scan, and interpolating the remaining blocked information. Rigid body image fusion was performed for the reconstructed CBCT images with the simulation CT, and compared with CBCT images from the two‐rotation and conventional CBCT. Results: The single‐rotation CBCT images showed substantially reduced scatter‐related artifacts. Despite the degradation in longitudinal resolution, the visibility of anatomic structures (an important requirement of IGRT) was not significantly affected. The auto‐registration error was 0.8±0.3 mm in longitudinal direction, and was negligible in AP and lateral directions and three rotational directions. Conclusion: CBCT images from the single‐rotation mode can achieve reasonable longitudinal resolution for anatomic structure visualization and accurate auto‐registration in IGRT.

Original languageEnglish (US)
Pages (from-to)3384
Number of pages1
JournalMedical Physics
Volume37
Issue number6
DOIs
StatePublished - 2010
Externally publishedYes

Fingerprint

Image-Guided Radiotherapy
Cone-Beam Computed Tomography
Radiotherapy
Artifacts
Body Image
Feasibility Studies
Pelvis
X-Rays

ASJC Scopus subject areas

  • Biophysics
  • Radiology Nuclear Medicine and imaging

Cite this

TU‐C‐204B‐01 : Reduce Patient Dose and Improve Image Quality in CBCT for Image Guided Radiotherapy. / Jin, J.; Ren, L.; Kim, J.; Movsas, B.; Chetty, I.

In: Medical Physics, Vol. 37, No. 6, 2010, p. 3384.

Research output: Contribution to journalArticle

Jin, J. ; Ren, L. ; Kim, J. ; Movsas, B. ; Chetty, I. / TU‐C‐204B‐01 : Reduce Patient Dose and Improve Image Quality in CBCT for Image Guided Radiotherapy. In: Medical Physics. 2010 ; Vol. 37, No. 6. pp. 3384.
@article{8189ef2c86a74f099399c9dd43a503ec,
title = "TU‐C‐204B‐01: Reduce Patient Dose and Improve Image Quality in CBCT for Image Guided Radiotherapy",
abstract = "Introduction: We have demonstrated that cone beam CT (CBCT) image quality was substantially improved in terms of eliminating scatter related artifacts and enhancing contrast‐to‐noise ratio, using a 1D grid placed between the x‐ray source and the imaging object. The grid serves to physically reduce scatter while also enabling measurements of scatter simultaneously for post‐scan scatter correction. A full set of CBCT images can be generated from the partially‐blocked imaging data using either one‐ or dual‐rotation modes. Using one‐rotation has particularly the advantage of reducing imaging dose by a factor of two in comparison to conventional CBCT. The tradeoff is that longitudinal resolution is degraded. This study evaluates the feasibility of using CBCT images from the single‐rotation mode for image‐guided radiotherapy (IGRT). Methods and material: A lead grid of approximately 1‐mm septa width and interspace was placed at a source‐to‐grid distance of approximately 30‐cm in a Varian Trilogy CBCT system for the single‐rotation mode. An anthropomorphic pelvis phantom was used for the test. Various steps in imaging processing were performed for each projection, including measuring the scatter distribution, performing scatter correction, deriving imaging information in the grid penumbral regions by dividing the projection with a blank scan, and interpolating the remaining blocked information. Rigid body image fusion was performed for the reconstructed CBCT images with the simulation CT, and compared with CBCT images from the two‐rotation and conventional CBCT. Results: The single‐rotation CBCT images showed substantially reduced scatter‐related artifacts. Despite the degradation in longitudinal resolution, the visibility of anatomic structures (an important requirement of IGRT) was not significantly affected. The auto‐registration error was 0.8±0.3 mm in longitudinal direction, and was negligible in AP and lateral directions and three rotational directions. Conclusion: CBCT images from the single‐rotation mode can achieve reasonable longitudinal resolution for anatomic structure visualization and accurate auto‐registration in IGRT.",
author = "J. Jin and L. Ren and J. Kim and B. Movsas and I. Chetty",
year = "2010",
doi = "10.1118/1.3469224",
language = "English (US)",
volume = "37",
pages = "3384",
journal = "Medical Physics",
issn = "0094-2405",
publisher = "AAPM - American Association of Physicists in Medicine",
number = "6",

}

TY - JOUR

T1 - TU‐C‐204B‐01

T2 - Reduce Patient Dose and Improve Image Quality in CBCT for Image Guided Radiotherapy

AU - Jin, J.

AU - Ren, L.

AU - Kim, J.

AU - Movsas, B.

AU - Chetty, I.

PY - 2010

Y1 - 2010

N2 - Introduction: We have demonstrated that cone beam CT (CBCT) image quality was substantially improved in terms of eliminating scatter related artifacts and enhancing contrast‐to‐noise ratio, using a 1D grid placed between the x‐ray source and the imaging object. The grid serves to physically reduce scatter while also enabling measurements of scatter simultaneously for post‐scan scatter correction. A full set of CBCT images can be generated from the partially‐blocked imaging data using either one‐ or dual‐rotation modes. Using one‐rotation has particularly the advantage of reducing imaging dose by a factor of two in comparison to conventional CBCT. The tradeoff is that longitudinal resolution is degraded. This study evaluates the feasibility of using CBCT images from the single‐rotation mode for image‐guided radiotherapy (IGRT). Methods and material: A lead grid of approximately 1‐mm septa width and interspace was placed at a source‐to‐grid distance of approximately 30‐cm in a Varian Trilogy CBCT system for the single‐rotation mode. An anthropomorphic pelvis phantom was used for the test. Various steps in imaging processing were performed for each projection, including measuring the scatter distribution, performing scatter correction, deriving imaging information in the grid penumbral regions by dividing the projection with a blank scan, and interpolating the remaining blocked information. Rigid body image fusion was performed for the reconstructed CBCT images with the simulation CT, and compared with CBCT images from the two‐rotation and conventional CBCT. Results: The single‐rotation CBCT images showed substantially reduced scatter‐related artifacts. Despite the degradation in longitudinal resolution, the visibility of anatomic structures (an important requirement of IGRT) was not significantly affected. The auto‐registration error was 0.8±0.3 mm in longitudinal direction, and was negligible in AP and lateral directions and three rotational directions. Conclusion: CBCT images from the single‐rotation mode can achieve reasonable longitudinal resolution for anatomic structure visualization and accurate auto‐registration in IGRT.

AB - Introduction: We have demonstrated that cone beam CT (CBCT) image quality was substantially improved in terms of eliminating scatter related artifacts and enhancing contrast‐to‐noise ratio, using a 1D grid placed between the x‐ray source and the imaging object. The grid serves to physically reduce scatter while also enabling measurements of scatter simultaneously for post‐scan scatter correction. A full set of CBCT images can be generated from the partially‐blocked imaging data using either one‐ or dual‐rotation modes. Using one‐rotation has particularly the advantage of reducing imaging dose by a factor of two in comparison to conventional CBCT. The tradeoff is that longitudinal resolution is degraded. This study evaluates the feasibility of using CBCT images from the single‐rotation mode for image‐guided radiotherapy (IGRT). Methods and material: A lead grid of approximately 1‐mm septa width and interspace was placed at a source‐to‐grid distance of approximately 30‐cm in a Varian Trilogy CBCT system for the single‐rotation mode. An anthropomorphic pelvis phantom was used for the test. Various steps in imaging processing were performed for each projection, including measuring the scatter distribution, performing scatter correction, deriving imaging information in the grid penumbral regions by dividing the projection with a blank scan, and interpolating the remaining blocked information. Rigid body image fusion was performed for the reconstructed CBCT images with the simulation CT, and compared with CBCT images from the two‐rotation and conventional CBCT. Results: The single‐rotation CBCT images showed substantially reduced scatter‐related artifacts. Despite the degradation in longitudinal resolution, the visibility of anatomic structures (an important requirement of IGRT) was not significantly affected. The auto‐registration error was 0.8±0.3 mm in longitudinal direction, and was negligible in AP and lateral directions and three rotational directions. Conclusion: CBCT images from the single‐rotation mode can achieve reasonable longitudinal resolution for anatomic structure visualization and accurate auto‐registration in IGRT.

UR - http://www.scopus.com/inward/record.url?scp=85024819212&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85024819212&partnerID=8YFLogxK

U2 - 10.1118/1.3469224

DO - 10.1118/1.3469224

M3 - Article

AN - SCOPUS:85024819212

VL - 37

SP - 3384

JO - Medical Physics

JF - Medical Physics

SN - 0094-2405

IS - 6

ER -